Refrigeration Parts
Showing 151–165 of 348 results
-
Condensate Removal Pump
GOBI II Condensate Pump
Technical Data:
Maximum flow rate:
11 GPH (42 l/h.)
Maximum suction:
10 ft. (3 m) self priming
Maximum head: 65.60 ft. (20 m)
Sound: 20dBA at 3 ft. (1 m) / 19dBA at 1 EN ISO 3744:2010
Wireless access:
Remote wireless access with smartphone (optional feature)
Voltage:
100 ~ 240 VAC 50/60 Hz auto sensing universal power input
Power:
8 watts during maximum operation at 110V
Alarm relay:
10 Amps NO/NC contacts with integratedd replaceable HRC 10A fuse 5 × 20 mm
Weight:
1.3 Lbs. (600g)
Discharge star tube: 1/4“ I.D. (6.25 mm) × 3.3 ft. (1 m)
Protection: Class II double insulation, Fully potted, IP-44
Operation temp:
Ambient 37.5°F to 104°F (3°C to 40°C) / Water 41°F to 77°F (5°C to 25°C)
Compliance: Conforms to UL:778 and certfied to CSA C22.2#68SKU: WP-RF-3004045 -
Condensate Removal Pump
Little Giant 554138 VCC-20S Condensate Removal Pump
Little Giant 554138 VCC-20S Condensate Removal Pump
Made in Mexico
Designed for automatic collection and removal of condensate from air conditioning, refrigeration, and dehumidification equipment installed in air handling and plenum applications having limited space and where gravity drainage is not possible or practical.
The VCC-20 series is constructed with plastics that have been tested by Underwriter’s Laboratories’ to UL Standard 2043 “Fire Test for Heat and Visible Smoke Release for Discrete Products and Their Accessories Installed in Air Handling Spaces”.– The pump meets the requirements of UL 2043 and is labeled “For Plenum Applications”.
– 1/30 hp motor
– 1-3/4″ low profile tank height ideal for tight spaces
– Vertical centrifugal pump design
– 1.2 quart (1.1 liters) capacity tank
– Automatic start and stop switch
– 3/8″ O.D. barbed discharge adapter with built-in check valve (installed on the pump)
– 1-1/8″ diameter inlet
– Float-activated auxiliary high-level switch
– Two 72″ high-level switch lead wires
– Thermally protected, fan-cooled motor
– Intermittent liquid temperature up to 140 °F
– 20 ft shut-off head (115V model)
– Designed for hard-wire installation only
– 72″ 3-conductor lead wires with conduit fitting for ½” diameter flexible metal conduit
– Stainless motor shaftSKU: WP-LG-554138-1 -
Condensate Removal Pump
MicroDam MD-300 Condensate Removal Pump
APOLLO is a small tank pump designed to be installed under wall split air conditioning and condensing boilers.
[characteristic]
1. Compact size model for wall mounting positions
2. Intelligent float control main switch and safety switch
3. Built-in safety switch assembly
4. Built-in internal water tank to prevent dew
5. 1/4 turn check valve for easy maintenance
6. Thermal protection
7. CE / NRTL / PSE Certification[Technical specifications]
1. Power: 220~240V 50 / 60Hz
2. Ambient temperature: 0 to 50
3. Thermal protection: cut off to 110~120, automatically re-run after a few minutesSKU: WP-MD-300W -
Condensate Removal Pump
MicroDam MD-600 Condensate Removal Pump
POSEIDON is a medium tank pump designed to install common air conditioning and condensing boilers.
[characteristic]
1. Can provide floor or wall installation location
2. Optional safety switch assembly
3. 1/4 turn check valve for easy maintenance
4. Thermal protection
5. 3 inlet holes (30mm)
6. CE / NRTL / PSE certification[Technical specifications]
1. Power: 220~240V 50 / 60Hz
2. Ambient temperature: 0 to 50
3. Thermal protection: cut to 120, automatically re-run after a few minutesSKU: WP-MD-600 -
Condensate Removal Pump
MicroDam MD-600PSW Condensate Removal Pump
Noise-free pump for the new piston mechanism.
The pump flow is stable over all ranges from 0 to 6 m.
The APOLLO-Silenceis small tank pump is designed for the installation of wall split air conditioners and condensing boilers.SKU: WP-MD-600PSW -
Condensate Removal Pump
MicroDam MD1000C 離心排水泵 Centrifugal WATER PUMP
Hercules Compact Pump是一款大型泵
,適用於立式空調(舊款 23 坪空調或更多)、商用冰箱和恆溫恆濕器。產品特性
1,使用落地式
2.安全開關可選
3.適用於高揚程和高流量
4.使用對酯油具有強抗性的化學和耐熱塑料樹脂
5.配備過熱保護傳感器
6.使用一鍵式止回閥平穩維護
7.2個排水孔(30mm)
8.獲得國內、歐洲、美國、加拿大安全標準電源 220V~230V 50/60Hz可選
使用溫度 0℃~50℃
防過熱傳感器 120℃封閉,一段時間後返回
SKU: WP-MD-1000C
-
Condensate Removal Pump
GOBI II Condensate Pump
Technical Data:
Maximum flow rate:
11 GPH (42 l/h.)
Maximum suction:
10 ft. (3 m) self priming
Maximum head: 65.60 ft. (20 m)
Sound: 20dBA at 3 ft. (1 m) / 19dBA at 1 EN ISO 3744:2010
Wireless access:
Remote wireless access with smartphone (optional feature)
Voltage:
100 ~ 240 VAC 50/60 Hz auto sensing universal power input
Power:
8 watts during maximum operation at 110V
Alarm relay:
10 Amps NO/NC contacts with integratedd replaceable HRC 10A fuse 5 × 20 mm
Weight:
1.3 Lbs. (600g)
Discharge star tube: 1/4“ I.D. (6.25 mm) × 3.3 ft. (1 m)
Protection: Class II double insulation, Fully potted, IP-44
Operation temp:
Ambient 37.5°F to 104°F (3°C to 40°C) / Water 41°F to 77°F (5°C to 25°C)
Compliance: Conforms to UL:778 and certfied to CSA C22.2#68 -
Condensate Removal Pump
Little Giant 554138 VCC-20S Condensate Removal Pump
Little Giant 554138 VCC-20S Condensate Removal Pump
Made in Mexico
Designed for automatic collection and removal of condensate from air conditioning, refrigeration, and dehumidification equipment installed in air handling and plenum applications having limited space and where gravity drainage is not possible or practical.
The VCC-20 series is constructed with plastics that have been tested by Underwriter’s Laboratories’ to UL Standard 2043 “Fire Test for Heat and Visible Smoke Release for Discrete Products and Their Accessories Installed in Air Handling Spaces”.– The pump meets the requirements of UL 2043 and is labeled “For Plenum Applications”.
– 1/30 hp motor
– 1-3/4″ low profile tank height ideal for tight spaces
– Vertical centrifugal pump design
– 1.2 quart (1.1 liters) capacity tank
– Automatic start and stop switch
– 3/8″ O.D. barbed discharge adapter with built-in check valve (installed on the pump)
– 1-1/8″ diameter inlet
– Float-activated auxiliary high-level switch
– Two 72″ high-level switch lead wires
– Thermally protected, fan-cooled motor
– Intermittent liquid temperature up to 140 °F
– 20 ft shut-off head (115V model)
– Designed for hard-wire installation only
– 72″ 3-conductor lead wires with conduit fitting for ½” diameter flexible metal conduit
– Stainless motor shaft -
Condensate Removal Pump
MicroDam MD-300 Condensate Removal Pump
APOLLO is a small tank pump designed to be installed under wall split air conditioning and condensing boilers.
[characteristic]
1. Compact size model for wall mounting positions
2. Intelligent float control main switch and safety switch
3. Built-in safety switch assembly
4. Built-in internal water tank to prevent dew
5. 1/4 turn check valve for easy maintenance
6. Thermal protection
7. CE / NRTL / PSE Certification[Technical specifications]
1. Power: 220~240V 50 / 60Hz
2. Ambient temperature: 0 to 50
3. Thermal protection: cut off to 110~120, automatically re-run after a few minutes -
Condensate Removal Pump
MicroDam MD-600 Condensate Removal Pump
POSEIDON is a medium tank pump designed to install common air conditioning and condensing boilers.
[characteristic]
1. Can provide floor or wall installation location
2. Optional safety switch assembly
3. 1/4 turn check valve for easy maintenance
4. Thermal protection
5. 3 inlet holes (30mm)
6. CE / NRTL / PSE certification[Technical specifications]
1. Power: 220~240V 50 / 60Hz
2. Ambient temperature: 0 to 50
3. Thermal protection: cut to 120, automatically re-run after a few minutes -
Condensate Removal Pump
MicroDam MD1000C 離心排水泵 Centrifugal WATER PUMP
Hercules Compact Pump是一款大型泵
,適用於立式空調(舊款 23 坪空調或更多)、商用冰箱和恆溫恆濕器。產品特性
1,使用落地式
2.安全開關可選
3.適用於高揚程和高流量
4.使用對酯油具有強抗性的化學和耐熱塑料樹脂
5.配備過熱保護傳感器
6.使用一鍵式止回閥平穩維護
7.2個排水孔(30mm)
8.獲得國內、歐洲、美國、加拿大安全標準電源 220V~230V 50/60Hz可選
使用溫度 0℃~50℃
防過熱傳感器 120℃封閉,一段時間後返回
-
Condensate Removal Pump
GOBI II Condensate Pump
Technical Data:
Maximum flow rate:
11 GPH (42 l/h.)
Maximum suction:
10 ft. (3 m) self priming
Maximum head: 65.60 ft. (20 m)
Sound: 20dBA at 3 ft. (1 m) / 19dBA at 1 EN ISO 3744:2010
Wireless access:
Remote wireless access with smartphone (optional feature)
Voltage:
100 ~ 240 VAC 50/60 Hz auto sensing universal power input
Power:
8 watts during maximum operation at 110V
Alarm relay:
10 Amps NO/NC contacts with integratedd replaceable HRC 10A fuse 5 × 20 mm
Weight:
1.3 Lbs. (600g)
Discharge star tube: 1/4“ I.D. (6.25 mm) × 3.3 ft. (1 m)
Protection: Class II double insulation, Fully potted, IP-44
Operation temp:
Ambient 37.5°F to 104°F (3°C to 40°C) / Water 41°F to 77°F (5°C to 25°C)
Compliance: Conforms to UL:778 and certfied to CSA C22.2#68 -
Condensate Removal Pump
Little Giant 554138 VCC-20S Condensate Removal Pump
Little Giant 554138 VCC-20S Condensate Removal Pump
Made in Mexico
Designed for automatic collection and removal of condensate from air conditioning, refrigeration, and dehumidification equipment installed in air handling and plenum applications having limited space and where gravity drainage is not possible or practical.
The VCC-20 series is constructed with plastics that have been tested by Underwriter’s Laboratories’ to UL Standard 2043 “Fire Test for Heat and Visible Smoke Release for Discrete Products and Their Accessories Installed in Air Handling Spaces”.– The pump meets the requirements of UL 2043 and is labeled “For Plenum Applications”.
– 1/30 hp motor
– 1-3/4″ low profile tank height ideal for tight spaces
– Vertical centrifugal pump design
– 1.2 quart (1.1 liters) capacity tank
– Automatic start and stop switch
– 3/8″ O.D. barbed discharge adapter with built-in check valve (installed on the pump)
– 1-1/8″ diameter inlet
– Float-activated auxiliary high-level switch
– Two 72″ high-level switch lead wires
– Thermally protected, fan-cooled motor
– Intermittent liquid temperature up to 140 °F
– 20 ft shut-off head (115V model)
– Designed for hard-wire installation only
– 72″ 3-conductor lead wires with conduit fitting for ½” diameter flexible metal conduit
– Stainless motor shaft -
Condensate Removal Pump
MicroDam MD-300 Condensate Removal Pump
APOLLO is a small tank pump designed to be installed under wall split air conditioning and condensing boilers.
[characteristic]
1. Compact size model for wall mounting positions
2. Intelligent float control main switch and safety switch
3. Built-in safety switch assembly
4. Built-in internal water tank to prevent dew
5. 1/4 turn check valve for easy maintenance
6. Thermal protection
7. CE / NRTL / PSE Certification[Technical specifications]
1. Power: 220~240V 50 / 60Hz
2. Ambient temperature: 0 to 50
3. Thermal protection: cut off to 110~120, automatically re-run after a few minutes -
Condensate Removal Pump
MicroDam MD-600 Condensate Removal Pump
POSEIDON is a medium tank pump designed to install common air conditioning and condensing boilers.
[characteristic]
1. Can provide floor or wall installation location
2. Optional safety switch assembly
3. 1/4 turn check valve for easy maintenance
4. Thermal protection
5. 3 inlet holes (30mm)
6. CE / NRTL / PSE certification[Technical specifications]
1. Power: 220~240V 50 / 60Hz
2. Ambient temperature: 0 to 50
3. Thermal protection: cut to 120, automatically re-run after a few minutes -
Condensate Removal Pump
MicroDam MD1000C 離心排水泵 Centrifugal WATER PUMP
Hercules Compact Pump是一款大型泵
,適用於立式空調(舊款 23 坪空調或更多)、商用冰箱和恆溫恆濕器。產品特性
1,使用落地式
2.安全開關可選
3.適用於高揚程和高流量
4.使用對酯油具有強抗性的化學和耐熱塑料樹脂
5.配備過熱保護傳感器
6.使用一鍵式止回閥平穩維護
7.2個排水孔(30mm)
8.獲得國內、歐洲、美國、加拿大安全標準電源 220V~230V 50/60Hz可選
使用溫度 0℃~50℃
防過熱傳感器 120℃封閉,一段時間後返回