Refrigeration Tools
Showing 16–30 of 155 results
-
UV Paint
Armafinish 99 Paint – Class 0 UV Paint 2500ml (White)
Armafinish 99 Paint – Class 0 UV Paint 2500ml (White)
Armafinish 99 is a water-based coating that uses an advanced terpolymer resin system. When properly applied, the coating helps to protect Armaflex® flexible thermal insulation materials against sunlight, UV radiation and chemical attack. The coating when fully cured, maintains the flexibility, resistance to water vapour and fire perofmrance of the Armaflex® material. The coating may be further strengthened with a random mesh glass fibre scrim in case additional resistance to damage is required.
– Resistant to weathering and ageing
– Coating remains elastic
– Drip-free paint
– Specially developed for the coating and protection of Armaflex® insulation materialsSKU: UV-AC-UV-2.5L$627.00 -
Adhesive
Armaflex 520 adhesive (3.78L)
Armaflex 520 adhesive (3.78L)
THE TRIED & TESTED ADHESIVE FOR SUPERIOR ARMAFLEX® RELIABILITY!
Armaflex 520 (3.78L) adhesive is based on modified chloroprene rubber in a blend of flammable solvents. The material has low viscosity for ease of application and quick drying characteristics. In the dry state, Armaflex 520 Adhesive is not flammable.Armaflex 520 (3.78L) adhesive is particularly suitable for:
(i) joining Armaflex flexible elastomeric insulation
(ii) bonding the material to clean surfaces
(iii) joining Tubolit flexible polyethylene thermal insulation.
When properly cured the adhesive maintains the resistance to water vapour expected of Armaflex.Special Features:
– Fast drying contact adhesive
– Specially formulated for Armaflex® insulation
– Ensures reliable vapour-tight seal
– For operating temperatures up to +105 °C
– One-component industrial adhesive
– Low viscosity, air drying adhesiveSKU: GL-AC-520$356.00 -
Adhesive
Armaflex 520 adhesive (450ml)
Armaflex 520 adhesive (450ml)
THE TRIED & TESTED ADHESIVE FOR SUPERIOR ARMAFLEX® RELIABILITY!
Armaflex 520 (450ml) adhesive is based on modified chloroprene rubber in a blend of flammable solvents. The material has low viscosity for ease of application and quick drying characteristics. In the dry state, Armaflex 520 Adhesive is not flammable.Armaflex 520 (450ml) adhesive is particularly suitable for:
(i) joining Armaflex flexible elastomeric insulation
(ii) bonding the material to clean surfaces
(iii) joining Tubolit flexible polyethylene thermal insulation.
When properly cured the adhesive maintains the resistance to water vapour expected of Armaflex.Special Features:
– Fast drying contact adhesive
– Specially formulated for Armaflex® insulation
– Ensures reliable vapour-tight seal
– For operating temperatures up to +105 °C
– One-component industrial adhesive
– Low viscosity, air drying adhesiveSKU: GL-ARE-520$52.00 -
Manifolds
DIGIMON-SE Digital Manifold
- 48 Refrigerant tables incl. R410A, R744(CO2), R1234yf
- Analog- and Digital Display
- Accuracy: Class 1.0
- Pressure resolution: 0.01 bar / 0.5psi / 1kPa / 0.001MPa
- Pressure Gauge from –0,95 bar to +60 bar
- Direct calculation and display of superheat and subcool
- 2 precise K-Type temperature sensors
- Internal and external vacuum sensor
- Leak-test function
- Backlit LCD display with multiple protection
- User-friendly operation
- Fiber Reinforced ergonomic knobs
- Automatic power-save mode
- Low battery indicator
- Continuous measuring rate
SKU: EF-RF-DIGINOM-SE-3$3,838.00 -
Infrared Refrigerant Leak Detector
Fieldpiece SRL2K7 Infrared Refrigerant Leak Detector
Fieldpiece SRL2K7 Infrared Refrigerant Leak Detector
– Sensitivity better than 0.1 oz/yr
– Triggers on all CFCs, HFCs, HCFCs and blends.
– Auto recalibration
– Sealed sensor. Unlike heated diode and corona discharge leak detectors, the sensor doesn’t “touch” refrigerant as it passes through the instrument. Heated diode and corona discharge units tend to degrade or fail when they come in contact with high concentrations of refrigerant or touch liquid.
– Doesn’t trigger on oil or moisture like other types of detectors.
– Senses change in refrigerant levels. Works even in contaminated environments.
– Up and running in less than 30 seconds. Some heated elements and corona discharge units take much longer to warm up. UV dyes can take several hours to travel through a running system and can degrade system components.Designed for HVACR
– Superior Controlled Sensitivity. Doesn’t trigger on nuisance leaks unless in Turbo Mode.
– Rugged / Ergonomic Features. Ruggedized boot and it fit’s in your hand.
– Infrared Sensor. Lasts up to 10 years.
– Three Sensitivity Levels. Meets new SAE standards.
– Audible/Visual Alarm. Turn the beep on or off – you decide.
– Lithium Ion Battery (3.7V DC). Deliver around 8 hours of use per charge. Works while charging.
– Non-conductive, Sturdy Probe. Stays where you want it.
– Peak / Mute Buttons. Find leaks in noisy environments.
– Magnetic Hanger. Hang the unit while you repair the leak.
– Weighs 14oz. Tough doesn’t have to mean heavy.Delivery Scope:
– Advanced Refrigerant Leak Detector – SRL2(K7)
– Include chargers for the truck and the shop
– (5) O-rings and 10 Replacement Filters – RFL2
– 9-inch Flex-Probe Extension – RFE2
– Rigid Extension Probe – RRE2
– Blow-Molded Case – ABMK3
– Operator’s ManualSKU: ET-FP-SRL2K7 -
Filter Flag Indicator & Hour Meter Package
Filter Flag Indicator & Hour Meter Package
Filter Flag Indicator & Hour Meter Package
Filter Flag Indicator & Hour Meter Package includes the following products.
1. PEM CS200 Filter Flag Indicator
2. REXX HM-1 Hour Meter
3. H300 Plastic Case for PEM CS200 Filter Flag Indicator & REXX HM-1 Hour MeterSKU: DPC-PEM-HM-1-H300$188.00 -
PLASTIC TUBE & HOSE SHEAR
Imperial 327-FP PLASTIC TUBE & HOSE SHEAR 1/8” – 13/16” (4 to 20mm)
Imperial 327-FP PLASTIC TUBE & HOSE SHEAR 1/8” – 13/16” (4 to 20mm)
For 1/8” to 13/16” (4 mm to 20 mm) O.D. plastic tubing and non-metal reinforced hose. Can be wall- or bench-mounted for production, or carried in a toolbox. Includes Imperial S77615 replaceable hardened steel blade (installed). Length 9-3/4”. Wt. 1.0 lb.
* Not for use with metal reinforced hose.
SKU: HT-IL-327-FP$399.00
-
UV Paint
Armafinish 99 Paint – Class 0 UV Paint 2500ml (White)
Armafinish 99 Paint – Class 0 UV Paint 2500ml (White)
Armafinish 99 is a water-based coating that uses an advanced terpolymer resin system. When properly applied, the coating helps to protect Armaflex® flexible thermal insulation materials against sunlight, UV radiation and chemical attack. The coating when fully cured, maintains the flexibility, resistance to water vapour and fire perofmrance of the Armaflex® material. The coating may be further strengthened with a random mesh glass fibre scrim in case additional resistance to damage is required.
– Resistant to weathering and ageing
– Coating remains elastic
– Drip-free paint
– Specially developed for the coating and protection of Armaflex® insulation materials -
Adhesive
Armaflex 520 adhesive (3.78L)
Armaflex 520 adhesive (3.78L)
THE TRIED & TESTED ADHESIVE FOR SUPERIOR ARMAFLEX® RELIABILITY!
Armaflex 520 (3.78L) adhesive is based on modified chloroprene rubber in a blend of flammable solvents. The material has low viscosity for ease of application and quick drying characteristics. In the dry state, Armaflex 520 Adhesive is not flammable.Armaflex 520 (3.78L) adhesive is particularly suitable for:
(i) joining Armaflex flexible elastomeric insulation
(ii) bonding the material to clean surfaces
(iii) joining Tubolit flexible polyethylene thermal insulation.
When properly cured the adhesive maintains the resistance to water vapour expected of Armaflex.Special Features:
– Fast drying contact adhesive
– Specially formulated for Armaflex® insulation
– Ensures reliable vapour-tight seal
– For operating temperatures up to +105 °C
– One-component industrial adhesive
– Low viscosity, air drying adhesive -
Adhesive
Armaflex 520 adhesive (450ml)
Armaflex 520 adhesive (450ml)
THE TRIED & TESTED ADHESIVE FOR SUPERIOR ARMAFLEX® RELIABILITY!
Armaflex 520 (450ml) adhesive is based on modified chloroprene rubber in a blend of flammable solvents. The material has low viscosity for ease of application and quick drying characteristics. In the dry state, Armaflex 520 Adhesive is not flammable.Armaflex 520 (450ml) adhesive is particularly suitable for:
(i) joining Armaflex flexible elastomeric insulation
(ii) bonding the material to clean surfaces
(iii) joining Tubolit flexible polyethylene thermal insulation.
When properly cured the adhesive maintains the resistance to water vapour expected of Armaflex.Special Features:
– Fast drying contact adhesive
– Specially formulated for Armaflex® insulation
– Ensures reliable vapour-tight seal
– For operating temperatures up to +105 °C
– One-component industrial adhesive
– Low viscosity, air drying adhesive -
Manifolds
DIGIMON-SE Digital Manifold
- 48 Refrigerant tables incl. R410A, R744(CO2), R1234yf
- Analog- and Digital Display
- Accuracy: Class 1.0
- Pressure resolution: 0.01 bar / 0.5psi / 1kPa / 0.001MPa
- Pressure Gauge from –0,95 bar to +60 bar
- Direct calculation and display of superheat and subcool
- 2 precise K-Type temperature sensors
- Internal and external vacuum sensor
- Leak-test function
- Backlit LCD display with multiple protection
- User-friendly operation
- Fiber Reinforced ergonomic knobs
- Automatic power-save mode
- Low battery indicator
- Continuous measuring rate
-
Infrared Refrigerant Leak Detector
Fieldpiece SRL2K7 Infrared Refrigerant Leak Detector
Fieldpiece SRL2K7 Infrared Refrigerant Leak Detector
– Sensitivity better than 0.1 oz/yr
– Triggers on all CFCs, HFCs, HCFCs and blends.
– Auto recalibration
– Sealed sensor. Unlike heated diode and corona discharge leak detectors, the sensor doesn’t “touch” refrigerant as it passes through the instrument. Heated diode and corona discharge units tend to degrade or fail when they come in contact with high concentrations of refrigerant or touch liquid.
– Doesn’t trigger on oil or moisture like other types of detectors.
– Senses change in refrigerant levels. Works even in contaminated environments.
– Up and running in less than 30 seconds. Some heated elements and corona discharge units take much longer to warm up. UV dyes can take several hours to travel through a running system and can degrade system components.Designed for HVACR
– Superior Controlled Sensitivity. Doesn’t trigger on nuisance leaks unless in Turbo Mode.
– Rugged / Ergonomic Features. Ruggedized boot and it fit’s in your hand.
– Infrared Sensor. Lasts up to 10 years.
– Three Sensitivity Levels. Meets new SAE standards.
– Audible/Visual Alarm. Turn the beep on or off – you decide.
– Lithium Ion Battery (3.7V DC). Deliver around 8 hours of use per charge. Works while charging.
– Non-conductive, Sturdy Probe. Stays where you want it.
– Peak / Mute Buttons. Find leaks in noisy environments.
– Magnetic Hanger. Hang the unit while you repair the leak.
– Weighs 14oz. Tough doesn’t have to mean heavy.Delivery Scope:
– Advanced Refrigerant Leak Detector – SRL2(K7)
– Include chargers for the truck and the shop
– (5) O-rings and 10 Replacement Filters – RFL2
– 9-inch Flex-Probe Extension – RFE2
– Rigid Extension Probe – RRE2
– Blow-Molded Case – ABMK3
– Operator’s Manual -
Filter Flag Indicator & Hour Meter Package
Filter Flag Indicator & Hour Meter Package
Filter Flag Indicator & Hour Meter Package
Filter Flag Indicator & Hour Meter Package includes the following products.
1. PEM CS200 Filter Flag Indicator
2. REXX HM-1 Hour Meter
3. H300 Plastic Case for PEM CS200 Filter Flag Indicator & REXX HM-1 Hour Meter -
PLASTIC TUBE & HOSE SHEAR
Imperial 327-FP PLASTIC TUBE & HOSE SHEAR 1/8” – 13/16” (4 to 20mm)
Imperial 327-FP PLASTIC TUBE & HOSE SHEAR 1/8” – 13/16” (4 to 20mm)
For 1/8” to 13/16” (4 mm to 20 mm) O.D. plastic tubing and non-metal reinforced hose. Can be wall- or bench-mounted for production, or carried in a toolbox. Includes Imperial S77615 replaceable hardened steel blade (installed). Length 9-3/4”. Wt. 1.0 lb.
* Not for use with metal reinforced hose.
-
UV Paint
Armafinish 99 Paint – Class 0 UV Paint 2500ml (White)
Armafinish 99 Paint – Class 0 UV Paint 2500ml (White)
Armafinish 99 is a water-based coating that uses an advanced terpolymer resin system. When properly applied, the coating helps to protect Armaflex® flexible thermal insulation materials against sunlight, UV radiation and chemical attack. The coating when fully cured, maintains the flexibility, resistance to water vapour and fire perofmrance of the Armaflex® material. The coating may be further strengthened with a random mesh glass fibre scrim in case additional resistance to damage is required.
– Resistant to weathering and ageing
– Coating remains elastic
– Drip-free paint
– Specially developed for the coating and protection of Armaflex® insulation materials$627.00 -
Adhesive
Armaflex 520 adhesive (3.78L)
Armaflex 520 adhesive (3.78L)
THE TRIED & TESTED ADHESIVE FOR SUPERIOR ARMAFLEX® RELIABILITY!
Armaflex 520 (3.78L) adhesive is based on modified chloroprene rubber in a blend of flammable solvents. The material has low viscosity for ease of application and quick drying characteristics. In the dry state, Armaflex 520 Adhesive is not flammable.Armaflex 520 (3.78L) adhesive is particularly suitable for:
(i) joining Armaflex flexible elastomeric insulation
(ii) bonding the material to clean surfaces
(iii) joining Tubolit flexible polyethylene thermal insulation.
When properly cured the adhesive maintains the resistance to water vapour expected of Armaflex.Special Features:
– Fast drying contact adhesive
– Specially formulated for Armaflex® insulation
– Ensures reliable vapour-tight seal
– For operating temperatures up to +105 °C
– One-component industrial adhesive
– Low viscosity, air drying adhesive$356.00 -
Adhesive
Armaflex 520 adhesive (450ml)
Armaflex 520 adhesive (450ml)
THE TRIED & TESTED ADHESIVE FOR SUPERIOR ARMAFLEX® RELIABILITY!
Armaflex 520 (450ml) adhesive is based on modified chloroprene rubber in a blend of flammable solvents. The material has low viscosity for ease of application and quick drying characteristics. In the dry state, Armaflex 520 Adhesive is not flammable.Armaflex 520 (450ml) adhesive is particularly suitable for:
(i) joining Armaflex flexible elastomeric insulation
(ii) bonding the material to clean surfaces
(iii) joining Tubolit flexible polyethylene thermal insulation.
When properly cured the adhesive maintains the resistance to water vapour expected of Armaflex.Special Features:
– Fast drying contact adhesive
– Specially formulated for Armaflex® insulation
– Ensures reliable vapour-tight seal
– For operating temperatures up to +105 °C
– One-component industrial adhesive
– Low viscosity, air drying adhesive$52.00 -
Manifolds
DIGIMON-SE Digital Manifold
- 48 Refrigerant tables incl. R410A, R744(CO2), R1234yf
- Analog- and Digital Display
- Accuracy: Class 1.0
- Pressure resolution: 0.01 bar / 0.5psi / 1kPa / 0.001MPa
- Pressure Gauge from –0,95 bar to +60 bar
- Direct calculation and display of superheat and subcool
- 2 precise K-Type temperature sensors
- Internal and external vacuum sensor
- Leak-test function
- Backlit LCD display with multiple protection
- User-friendly operation
- Fiber Reinforced ergonomic knobs
- Automatic power-save mode
- Low battery indicator
- Continuous measuring rate
$3,838.00 -
Infrared Refrigerant Leak Detector
Fieldpiece SRL2K7 Infrared Refrigerant Leak Detector
Fieldpiece SRL2K7 Infrared Refrigerant Leak Detector
– Sensitivity better than 0.1 oz/yr
– Triggers on all CFCs, HFCs, HCFCs and blends.
– Auto recalibration
– Sealed sensor. Unlike heated diode and corona discharge leak detectors, the sensor doesn’t “touch” refrigerant as it passes through the instrument. Heated diode and corona discharge units tend to degrade or fail when they come in contact with high concentrations of refrigerant or touch liquid.
– Doesn’t trigger on oil or moisture like other types of detectors.
– Senses change in refrigerant levels. Works even in contaminated environments.
– Up and running in less than 30 seconds. Some heated elements and corona discharge units take much longer to warm up. UV dyes can take several hours to travel through a running system and can degrade system components.Designed for HVACR
– Superior Controlled Sensitivity. Doesn’t trigger on nuisance leaks unless in Turbo Mode.
– Rugged / Ergonomic Features. Ruggedized boot and it fit’s in your hand.
– Infrared Sensor. Lasts up to 10 years.
– Three Sensitivity Levels. Meets new SAE standards.
– Audible/Visual Alarm. Turn the beep on or off – you decide.
– Lithium Ion Battery (3.7V DC). Deliver around 8 hours of use per charge. Works while charging.
– Non-conductive, Sturdy Probe. Stays where you want it.
– Peak / Mute Buttons. Find leaks in noisy environments.
– Magnetic Hanger. Hang the unit while you repair the leak.
– Weighs 14oz. Tough doesn’t have to mean heavy.Delivery Scope:
– Advanced Refrigerant Leak Detector – SRL2(K7)
– Include chargers for the truck and the shop
– (5) O-rings and 10 Replacement Filters – RFL2
– 9-inch Flex-Probe Extension – RFE2
– Rigid Extension Probe – RRE2
– Blow-Molded Case – ABMK3
– Operator’s Manual -
Filter Flag Indicator & Hour Meter Package
Filter Flag Indicator & Hour Meter Package
Filter Flag Indicator & Hour Meter Package
Filter Flag Indicator & Hour Meter Package includes the following products.
1. PEM CS200 Filter Flag Indicator
2. REXX HM-1 Hour Meter
3. H300 Plastic Case for PEM CS200 Filter Flag Indicator & REXX HM-1 Hour Meter$188.00 -
PLASTIC TUBE & HOSE SHEAR
Imperial 327-FP PLASTIC TUBE & HOSE SHEAR 1/8” – 13/16” (4 to 20mm)
Imperial 327-FP PLASTIC TUBE & HOSE SHEAR 1/8” – 13/16” (4 to 20mm)
For 1/8” to 13/16” (4 mm to 20 mm) O.D. plastic tubing and non-metal reinforced hose. Can be wall- or bench-mounted for production, or carried in a toolbox. Includes Imperial S77615 replaceable hardened steel blade (installed). Length 9-3/4”. Wt. 1.0 lb.
* Not for use with metal reinforced hose.
$399.00