Shop
Showing 721–735 of 1809 results
-
Water Valve
oventrop 1060206 Double Regulating Valve DN20
“Hydrocontrol VTR” 青铜静态平衡阀 PN 25
倾斜式阀体结构，精细的预设定开度，预设定值位于手轮侧面，方便查看。所有的功能部件在阀体的同一侧，操作简便。供回水管路均可安装。阀体和阀帽：青铜，阀芯和阀杆：防脱锌黄铜（DZR）,阀芯带PTFE密封，阀杆采用双O型环密封免维护。测压嘴： 1/4”。内螺纹：EN 10226oven@Material: 青铜
表面层: 未镀kvs值: 5.71
尺寸: DN 20最高工作压力: 25 bar
最低工作温度: -20 °C
最高工作温度: 150 °CSKU: PR-OP-1060206 -
Water Valve
oventrop 1060208 Double Regulating Valve DN25 1″
“Hydrocontrol VTR” 青铜静态平衡阀 PN 25
倾斜式阀体结构，精细的预设定开度，预设定值位于手轮侧面，方便查看。所有的功能部件在阀体的同一侧，操作简便。供回水管路均可安装。阀体和阀帽：青铜，阀芯和阀杆：防脱锌黄铜（DZR）,阀芯带PTFE密封，阀杆采用双O型环密封免维护。测压嘴： 1/4”。内螺纹：EN 10226oven@Material: 青铜
表面层: 未镀kvs值: 8.89
尺寸: DN 25最高工作压力: 25 bar
最低工作温度: -20 °C
最高工作温度: 150 °CSKU: PR-OP-1060208 -
Water Valve
oventrop 1060210 Double Regulating Valve DN32 1-1/4″
“Hydrocontrol VTR” 青铜静态平衡阀 PN 25
倾斜式阀体结构，精细的预设定开度，预设定值位于手轮侧面，方便查看。所有的功能部件在阀体的同一侧，操作简便。供回水管路均可安装。阀体和阀帽：青铜，阀芯和阀杆：防脱锌黄铜（DZR）,阀芯带PTFE密封，阀杆采用双O型环密封免维护。测压嘴： 1/4”。内螺纹：EN 10226oven@Material: 青铜
表面层: 未镀kvs值: 19.45
尺寸: DN 32最高工作压力: 25 bar
最低工作温度: -20 °C
最高工作温度: 150 °CSKU: PR-OP-1060210 -
Water Valve
oventrop 1060212 Double Regulating Valve DN40 1-1/2″
“Hydrocontrol VTR” 青铜静态平衡阀 PN 25
倾斜式阀体结构，精细的预设定开度，预设定值位于手轮侧面，方便查看。所有的功能部件在阀体的同一侧，操作简便。供回水管路均可安装。阀体和阀帽：青铜，阀芯和阀杆：防脱锌黄铜（DZR）,阀芯带PTFE密封，阀杆采用双O型环密封免维护。测压嘴： 1/4”。内螺纹：EN 10226oven@Material: 青铜
表面层: 未镀kvs值: 19.45
尺寸: DN 32最高工作压力: 25 bar
最低工作温度: -20 °C
最高工作温度: 150 °CSKU: PR-OP-1060212 -
Pressure Control 2
P32AC-2C
當空氣流量變化時，此開關能夠檢測壓差的變化（動
壓或通過固定節流圈的壓降）。由兩個傳感孔檢測
到的壓差，作用於壓差開關薄膜的兩側。用彈簧承托
的薄膜移動並啟動開關。 P32系列也可用於探測微正
壓，只需使用高壓連接端而不用使用低壓連接端。若
探測真空時，便只需使用低壓連接端，而高壓連接端
不接，直接接通大氣。
特點
易讀的設定點標度
範圍寬 (1~125mm水柱.)
偏差小 (最低1mm水柱)
接線空間大
多種安裝配件的型號可供選擇
應用
這種壓差（差動）開關是用於感應空氣流動，空氣壓
力或空氣壓差，典型的應用包括：
探測過濾器阻塞狀態
探測空調盤管結霜狀況或除霜週期的開始時間
檢測暖風或通風管內的風流狀態
作為變風量空調系統的最大風流控制器SKU: DPC-JN-P32AC2C -
Globe Valve
Pegler 1031 Bronze Globe Valve 1-1/2” DN40 (112011)
Pegler 1031 Bronze Globe Valve 1-1/2” DN40 (112011)
The Pegler brand has been a major force in valves for over 100 years and is continuing development in today’s markets by offering globe valves as a traditional offer for isolation and regulation in pipe lines. With two seat options this concise range of globe valves are used to throttle efficiently.
Pegler Globe Valves are used for flow regulation, frequent operation, increased flow resistance or positive shutoff when closed.Specifications:
Dimensions: 1-1/2”
Series: 1031 GLOBE VALVE
Product Code: 112011
BS 5154 PN32 Series B
metal disk
Flow Rate: 26.90Kv m3/h
Minimum Operating Pressure (bar): No Minimum Operating Pressure
Maximum Cold Working Pressure (bar): 32.0 bar at temperatures up to 100°C
Maximum Hot Working Pressure (bar): 14.0 bar at temperatures up to 198°CSKU: HV-PG-DN40 -
Globe Valve
Pegler 1031 Bronze Globe Valve 1-1/4” DN32 (112010)
Pegler 1031 Bronze Globe Valve 1-1/4” DN32 (112010)
The Pegler brand has been a major force in valves for over 100 years and is continuing development in today’s markets by offering globe valves as a traditional offer for isolation and regulation in pipe lines. With two seat options this concise range of globe valves are used to throttle efficiently.
Pegler Globe Valves are used for flow regulation, frequent operation, increased flow resistance or positive shutoff when closed.Specifications:
Dimensions: 1-1/4”
Series: 1031 GLOBE VALVE
Product Code: 112010
BS 5154 PN32 Series B
metal disk
Flow Rate: 18.70Kv m3/h
Minimum Operating Pressure (bar): No Minimum Operating Pressure
Maximum Cold Working Pressure (bar): 32.0 bar at temperatures up to 100°C
Maximum Hot Working Pressure (bar): 14.0 bar at temperatures up to 198°CSKU: HV-PG-DN32 -
Globe Valve
Pegler 1031 Bronze Globe Valve 1” DN25 (112009)
Pegler 1031 Bronze Globe Valve 1” DN25 (112009)
The Pegler brand has been a major force in valves for over 100 years and is continuing development in today’s markets by offering globe valves as a traditional offer for isolation and regulation in pipe lines. With two seat options this concise range of globe valves are used to throttle efficiently.
Pegler Globe Valves are used for flow regulation, frequent operation, increased flow resistance or positive shutoff when closed.Specifications:
Dimensions: 1”
Series: 1031 GLOBE VALVE
Product Code: 112009
BS 5154 PN32 Series B
metal disk
Flow Rate: 11.70Kv m3/h
Minimum Operating Pressure (bar): No Minimum Operating Pressure
Maximum Cold Working Pressure (bar): 32.0 bar at temperatures up to 100°C
Maximum Hot Working Pressure (bar): 14.0 bar at temperatures up to 198°CSKU: HV-PG-DN25 -
Globe Valve
Pegler 1031 Bronze Globe Valve 1/2″ DN15 (112007)
Pegler 1031 Bronze Globe Valve 1/2″ DN15 (112007)
The Pegler brand has been a major force in valves for over 100 years and is continuing development in today’s markets by offering globe valves as a traditional offer for isolation and regulation in pipe lines. With two seat options this concise range of globe valves are used to throttle efficiently.
Pegler Globe Valves are used for flow regulation, frequent operation, increased flow resistance or positive shutoff when closed.Specifications:
Dimensions: 1/2″
Series: 1031 GLOBE VALVE
Product Code: 112007
BS 5154 PN32 Series B
metal disk
Flow Rate: 2.30Kv m3/h
Minimum Operating Pressure (bar): No Minimum Operating Pressure
Maximum Cold Working Pressure (bar): 32.0 bar at temperatures up to 100°C
Maximum Hot Working Pressure (bar): 14.0 bar at temperatures up to 198°CSKU: HV-PG-DN15 -
Globe Valve
Pegler 1031 Bronze Globe Valve 2” DN50 (112012)
Pegler 1031 Bronze Globe Valve 2” DN50 (112012)
The Pegler brand has been a major force in valves for over 100 years and is continuing development in today’s markets by offering globe valves as a traditional offer for isolation and regulation in pipe lines. With two seat options this concise range of globe valves are used to throttle efficiently.
Pegler Globe Valves are used for flow regulation, frequent operation, increased flow resistance or positive shutoff when closed.Specifications:
Dimensions: 2”
Series: 1031 GLOBE VALVE
Product Code: 112012
BS 5154 PN32 Series B
metal disk
Flow Rate: 49.10Kv m3/h
Minimum Operating Pressure (bar): No Minimum Operating Pressure
Maximum Cold Working Pressure (bar): 32.0 bar at temperatures up to 100°C
Maximum Hot Working Pressure (bar): 14.0 bar at temperatures up to 198°CSKU: HV-PG-DN50 -
Globe Valve
Pegler 1031 Bronze Globe Valve 3/4” DN20 (112008)
Pegler 1031 Bronze Globe Valve 3/4” DN20 (112008)
The Pegler brand has been a major force in valves for over 100 years and is continuing development in today’s markets by offering globe valves as a traditional offer for isolation and regulation in pipe lines. With two seat options this concise range of globe valves are used to throttle efficiently.
Pegler Globe Valves are used for flow regulation, frequent operation, increased flow resistance or positive shutoff when closed.Specifications:
Dimensions: 3/4”
Series: 1031 GLOBE VALVE
Product Code: 112008
BS 5154 PN32 Series B
metal disk
Flow Rate: 5.90Kv m3/h
Minimum Operating Pressure (bar): No Minimum Operating Pressure
Maximum Cold Working Pressure (bar): 32.0 bar at temperatures up to 100°C
Maximum Hot Working Pressure (bar): 14.0 bar at temperatures up to 198°CSKU: HV-PG-DN20 -
Gate Valve
Pegler 10751 Bronze Gate Valve 1-1/2” (101054)
Pegler 10751 Bronze Gate Valve 1-1/2” (101054)
The Pegler brand has been a major force in valves for over 100 years and is continuing development in todays’ markets by offering gate valves with heat free end connections. Press fit and Push fit connection options now complement its traditional threaded, compression and flanged valve options. Optimally designed, traditional full way gate valves in the Pegler Commercial range are designed for long trouble free service. Available in hand wheel and key operated lockshield designs they provide an ideal means of isolating a range of fluids in pipe lines
Specifications:
Dimensions: 1-1/2”
Series: 10751 PN20 Gate Valve
Product Code: 101054
Bronze Full Way Gate Valve
BS 5154 PN20 Series B
Flow Rate: 94.68Kv m3/h
Minimum Operating Pressure (bar): No Minimum Operating Pressure
Maximum Cold Working Pressure (bar): 20.0 bar at temperatures up to 100°C
Maximum Hot Working Pressure (bar): 9.0 bar at temperatures up to 180°CSKU: HV-PG-101054 -
Gate Valve
Pegler 10751 Bronze Gate Valve 1-1/4” (101053)
Pegler 10751 Bronze Gate Valve 1-1/4” (101053)
The Pegler brand has been a major force in valves for over 100 years and is continuing development in todays’ markets by offering gate valves with heat free end connections. Press fit and Push fit connection options now complement its traditional threaded, compression and flanged valve options. Optimally designed, traditional full way gate valves in the Pegler Commercial range are designed for long trouble free service. Available in hand wheel and key operated lockshield designs they provide an ideal means of isolating a range of fluids in pipe lines
Specifications:
Dimensions: 1-1/4”
Series: 10751 PN20 Gate Valve
Product Code: 101053
Bronze Full Way Gate Valve
BS 5154 PN20 Series B
Flow Rate: 65.98Kv m3/h
Minimum Operating Pressure (bar): No Minimum Operating Pressure
Maximum Cold Working Pressure (bar): 20.0 bar at temperatures up to 100°C
Maximum Hot Working Pressure (bar): 9.0 bar at temperatures up to 180°CSKU: HV-PG-101053
-
Water Valve
oventrop 1060206 Double Regulating Valve DN20
“Hydrocontrol VTR” 青铜静态平衡阀 PN 25
倾斜式阀体结构，精细的预设定开度，预设定值位于手轮侧面，方便查看。所有的功能部件在阀体的同一侧，操作简便。供回水管路均可安装。阀体和阀帽：青铜，阀芯和阀杆：防脱锌黄铜（DZR）,阀芯带PTFE密封，阀杆采用双O型环密封免维护。测压嘴： 1/4”。内螺纹：EN 10226oven@Material: 青铜
表面层: 未镀kvs值: 5.71
尺寸: DN 20最高工作压力: 25 bar
最低工作温度: -20 °C
最高工作温度: 150 °C -
Water Valve
oventrop 1060208 Double Regulating Valve DN25 1″
“Hydrocontrol VTR” 青铜静态平衡阀 PN 25
倾斜式阀体结构，精细的预设定开度，预设定值位于手轮侧面，方便查看。所有的功能部件在阀体的同一侧，操作简便。供回水管路均可安装。阀体和阀帽：青铜，阀芯和阀杆：防脱锌黄铜（DZR）,阀芯带PTFE密封，阀杆采用双O型环密封免维护。测压嘴： 1/4”。内螺纹：EN 10226oven@Material: 青铜
表面层: 未镀kvs值: 8.89
尺寸: DN 25最高工作压力: 25 bar
最低工作温度: -20 °C
最高工作温度: 150 °C -
Water Valve
oventrop 1060210 Double Regulating Valve DN32 1-1/4″
“Hydrocontrol VTR” 青铜静态平衡阀 PN 25
倾斜式阀体结构，精细的预设定开度，预设定值位于手轮侧面，方便查看。所有的功能部件在阀体的同一侧，操作简便。供回水管路均可安装。阀体和阀帽：青铜，阀芯和阀杆：防脱锌黄铜（DZR）,阀芯带PTFE密封，阀杆采用双O型环密封免维护。测压嘴： 1/4”。内螺纹：EN 10226oven@Material: 青铜
表面层: 未镀kvs值: 19.45
尺寸: DN 32最高工作压力: 25 bar
最低工作温度: -20 °C
最高工作温度: 150 °C -
Water Valve
oventrop 1060212 Double Regulating Valve DN40 1-1/2″
“Hydrocontrol VTR” 青铜静态平衡阀 PN 25
倾斜式阀体结构，精细的预设定开度，预设定值位于手轮侧面，方便查看。所有的功能部件在阀体的同一侧，操作简便。供回水管路均可安装。阀体和阀帽：青铜，阀芯和阀杆：防脱锌黄铜（DZR）,阀芯带PTFE密封，阀杆采用双O型环密封免维护。测压嘴： 1/4”。内螺纹：EN 10226oven@Material: 青铜
表面层: 未镀kvs值: 19.45
尺寸: DN 32最高工作压力: 25 bar
最低工作温度: -20 °C
最高工作温度: 150 °C -
Pressure Control 2
P32AC-2C
當空氣流量變化時，此開關能夠檢測壓差的變化（動
壓或通過固定節流圈的壓降）。由兩個傳感孔檢測
到的壓差，作用於壓差開關薄膜的兩側。用彈簧承托
的薄膜移動並啟動開關。 P32系列也可用於探測微正
壓，只需使用高壓連接端而不用使用低壓連接端。若
探測真空時，便只需使用低壓連接端，而高壓連接端
不接，直接接通大氣。
特點
易讀的設定點標度
範圍寬 (1~125mm水柱.)
偏差小 (最低1mm水柱)
接線空間大
多種安裝配件的型號可供選擇
應用
這種壓差（差動）開關是用於感應空氣流動，空氣壓
力或空氣壓差，典型的應用包括：
探測過濾器阻塞狀態
探測空調盤管結霜狀況或除霜週期的開始時間
檢測暖風或通風管內的風流狀態
作為變風量空調系統的最大風流控制器 -
Globe Valve
Pegler 1031 Bronze Globe Valve 1-1/2” DN40 (112011)
Pegler 1031 Bronze Globe Valve 1-1/2” DN40 (112011)
The Pegler brand has been a major force in valves for over 100 years and is continuing development in today’s markets by offering globe valves as a traditional offer for isolation and regulation in pipe lines. With two seat options this concise range of globe valves are used to throttle efficiently.
Pegler Globe Valves are used for flow regulation, frequent operation, increased flow resistance or positive shutoff when closed.Specifications:
Dimensions: 1-1/2”
Series: 1031 GLOBE VALVE
Product Code: 112011
BS 5154 PN32 Series B
metal disk
Flow Rate: 26.90Kv m3/h
Minimum Operating Pressure (bar): No Minimum Operating Pressure
Maximum Cold Working Pressure (bar): 32.0 bar at temperatures up to 100°C
Maximum Hot Working Pressure (bar): 14.0 bar at temperatures up to 198°C -
Globe Valve
Pegler 1031 Bronze Globe Valve 1-1/4” DN32 (112010)
Pegler 1031 Bronze Globe Valve 1-1/4” DN32 (112010)
The Pegler brand has been a major force in valves for over 100 years and is continuing development in today’s markets by offering globe valves as a traditional offer for isolation and regulation in pipe lines. With two seat options this concise range of globe valves are used to throttle efficiently.
Pegler Globe Valves are used for flow regulation, frequent operation, increased flow resistance or positive shutoff when closed.Specifications:
Dimensions: 1-1/4”
Series: 1031 GLOBE VALVE
Product Code: 112010
BS 5154 PN32 Series B
metal disk
Flow Rate: 18.70Kv m3/h
Minimum Operating Pressure (bar): No Minimum Operating Pressure
Maximum Cold Working Pressure (bar): 32.0 bar at temperatures up to 100°C
Maximum Hot Working Pressure (bar): 14.0 bar at temperatures up to 198°C -
Globe Valve
Pegler 1031 Bronze Globe Valve 1” DN25 (112009)
Pegler 1031 Bronze Globe Valve 1” DN25 (112009)
The Pegler brand has been a major force in valves for over 100 years and is continuing development in today’s markets by offering globe valves as a traditional offer for isolation and regulation in pipe lines. With two seat options this concise range of globe valves are used to throttle efficiently.
Pegler Globe Valves are used for flow regulation, frequent operation, increased flow resistance or positive shutoff when closed.Specifications:
Dimensions: 1”
Series: 1031 GLOBE VALVE
Product Code: 112009
BS 5154 PN32 Series B
metal disk
Flow Rate: 11.70Kv m3/h
Minimum Operating Pressure (bar): No Minimum Operating Pressure
Maximum Cold Working Pressure (bar): 32.0 bar at temperatures up to 100°C
Maximum Hot Working Pressure (bar): 14.0 bar at temperatures up to 198°C -
Globe Valve
Pegler 1031 Bronze Globe Valve 1/2″ DN15 (112007)
Pegler 1031 Bronze Globe Valve 1/2″ DN15 (112007)
The Pegler brand has been a major force in valves for over 100 years and is continuing development in today’s markets by offering globe valves as a traditional offer for isolation and regulation in pipe lines. With two seat options this concise range of globe valves are used to throttle efficiently.
Pegler Globe Valves are used for flow regulation, frequent operation, increased flow resistance or positive shutoff when closed.Specifications:
Dimensions: 1/2″
Series: 1031 GLOBE VALVE
Product Code: 112007
BS 5154 PN32 Series B
metal disk
Flow Rate: 2.30Kv m3/h
Minimum Operating Pressure (bar): No Minimum Operating Pressure
Maximum Cold Working Pressure (bar): 32.0 bar at temperatures up to 100°C
Maximum Hot Working Pressure (bar): 14.0 bar at temperatures up to 198°C -
Globe Valve
Pegler 1031 Bronze Globe Valve 2” DN50 (112012)
Pegler 1031 Bronze Globe Valve 2” DN50 (112012)
The Pegler brand has been a major force in valves for over 100 years and is continuing development in today’s markets by offering globe valves as a traditional offer for isolation and regulation in pipe lines. With two seat options this concise range of globe valves are used to throttle efficiently.
Pegler Globe Valves are used for flow regulation, frequent operation, increased flow resistance or positive shutoff when closed.Specifications:
Dimensions: 2”
Series: 1031 GLOBE VALVE
Product Code: 112012
BS 5154 PN32 Series B
metal disk
Flow Rate: 49.10Kv m3/h
Minimum Operating Pressure (bar): No Minimum Operating Pressure
Maximum Cold Working Pressure (bar): 32.0 bar at temperatures up to 100°C
Maximum Hot Working Pressure (bar): 14.0 bar at temperatures up to 198°C -
Globe Valve
Pegler 1031 Bronze Globe Valve 3/4” DN20 (112008)
Pegler 1031 Bronze Globe Valve 3/4” DN20 (112008)
The Pegler brand has been a major force in valves for over 100 years and is continuing development in today’s markets by offering globe valves as a traditional offer for isolation and regulation in pipe lines. With two seat options this concise range of globe valves are used to throttle efficiently.
Pegler Globe Valves are used for flow regulation, frequent operation, increased flow resistance or positive shutoff when closed.Specifications:
Dimensions: 3/4”
Series: 1031 GLOBE VALVE
Product Code: 112008
BS 5154 PN32 Series B
metal disk
Flow Rate: 5.90Kv m3/h
Minimum Operating Pressure (bar): No Minimum Operating Pressure
Maximum Cold Working Pressure (bar): 32.0 bar at temperatures up to 100°C
Maximum Hot Working Pressure (bar): 14.0 bar at temperatures up to 198°C -
Gate Valve
Pegler 10751 Bronze Gate Valve 1-1/2” (101054)
Pegler 10751 Bronze Gate Valve 1-1/2” (101054)
The Pegler brand has been a major force in valves for over 100 years and is continuing development in todays’ markets by offering gate valves with heat free end connections. Press fit and Push fit connection options now complement its traditional threaded, compression and flanged valve options. Optimally designed, traditional full way gate valves in the Pegler Commercial range are designed for long trouble free service. Available in hand wheel and key operated lockshield designs they provide an ideal means of isolating a range of fluids in pipe lines
Specifications:
Dimensions: 1-1/2”
Series: 10751 PN20 Gate Valve
Product Code: 101054
Bronze Full Way Gate Valve
BS 5154 PN20 Series B
Flow Rate: 94.68Kv m3/h
Minimum Operating Pressure (bar): No Minimum Operating Pressure
Maximum Cold Working Pressure (bar): 20.0 bar at temperatures up to 100°C
Maximum Hot Working Pressure (bar): 9.0 bar at temperatures up to 180°C -
Gate Valve
Pegler 10751 Bronze Gate Valve 1-1/4” (101053)
Pegler 10751 Bronze Gate Valve 1-1/4” (101053)
The Pegler brand has been a major force in valves for over 100 years and is continuing development in todays’ markets by offering gate valves with heat free end connections. Press fit and Push fit connection options now complement its traditional threaded, compression and flanged valve options. Optimally designed, traditional full way gate valves in the Pegler Commercial range are designed for long trouble free service. Available in hand wheel and key operated lockshield designs they provide an ideal means of isolating a range of fluids in pipe lines
Specifications:
Dimensions: 1-1/4”
Series: 10751 PN20 Gate Valve
Product Code: 101053
Bronze Full Way Gate Valve
BS 5154 PN20 Series B
Flow Rate: 65.98Kv m3/h
Minimum Operating Pressure (bar): No Minimum Operating Pressure
Maximum Cold Working Pressure (bar): 20.0 bar at temperatures up to 100°C
Maximum Hot Working Pressure (bar): 9.0 bar at temperatures up to 180°C
-
Water Valve
oventrop 1060206 Double Regulating Valve DN20
“Hydrocontrol VTR” 青铜静态平衡阀 PN 25
倾斜式阀体结构，精细的预设定开度，预设定值位于手轮侧面，方便查看。所有的功能部件在阀体的同一侧，操作简便。供回水管路均可安装。阀体和阀帽：青铜，阀芯和阀杆：防脱锌黄铜（DZR）,阀芯带PTFE密封，阀杆采用双O型环密封免维护。测压嘴： 1/4”。内螺纹：EN 10226oven@Material: 青铜
表面层: 未镀kvs值: 5.71
尺寸: DN 20最高工作压力: 25 bar
最低工作温度: -20 °C
最高工作温度: 150 °C -
Water Valve
oventrop 1060208 Double Regulating Valve DN25 1″
“Hydrocontrol VTR” 青铜静态平衡阀 PN 25
倾斜式阀体结构，精细的预设定开度，预设定值位于手轮侧面，方便查看。所有的功能部件在阀体的同一侧，操作简便。供回水管路均可安装。阀体和阀帽：青铜，阀芯和阀杆：防脱锌黄铜（DZR）,阀芯带PTFE密封，阀杆采用双O型环密封免维护。测压嘴： 1/4”。内螺纹：EN 10226oven@Material: 青铜
表面层: 未镀kvs值: 8.89
尺寸: DN 25最高工作压力: 25 bar
最低工作温度: -20 °C
最高工作温度: 150 °C -
Water Valve
oventrop 1060210 Double Regulating Valve DN32 1-1/4″
“Hydrocontrol VTR” 青铜静态平衡阀 PN 25
倾斜式阀体结构，精细的预设定开度，预设定值位于手轮侧面，方便查看。所有的功能部件在阀体的同一侧，操作简便。供回水管路均可安装。阀体和阀帽：青铜，阀芯和阀杆：防脱锌黄铜（DZR）,阀芯带PTFE密封，阀杆采用双O型环密封免维护。测压嘴： 1/4”。内螺纹：EN 10226oven@Material: 青铜
表面层: 未镀kvs值: 19.45
尺寸: DN 32最高工作压力: 25 bar
最低工作温度: -20 °C
最高工作温度: 150 °C -
Water Valve
oventrop 1060212 Double Regulating Valve DN40 1-1/2″
“Hydrocontrol VTR” 青铜静态平衡阀 PN 25
倾斜式阀体结构，精细的预设定开度，预设定值位于手轮侧面，方便查看。所有的功能部件在阀体的同一侧，操作简便。供回水管路均可安装。阀体和阀帽：青铜，阀芯和阀杆：防脱锌黄铜（DZR）,阀芯带PTFE密封，阀杆采用双O型环密封免维护。测压嘴： 1/4”。内螺纹：EN 10226oven@Material: 青铜
表面层: 未镀kvs值: 19.45
尺寸: DN 32最高工作压力: 25 bar
最低工作温度: -20 °C
最高工作温度: 150 °C -
Pressure Control 2
P32AC-2C
當空氣流量變化時，此開關能夠檢測壓差的變化（動
壓或通過固定節流圈的壓降）。由兩個傳感孔檢測
到的壓差，作用於壓差開關薄膜的兩側。用彈簧承托
的薄膜移動並啟動開關。 P32系列也可用於探測微正
壓，只需使用高壓連接端而不用使用低壓連接端。若
探測真空時，便只需使用低壓連接端，而高壓連接端
不接，直接接通大氣。
特點
易讀的設定點標度
範圍寬 (1~125mm水柱.)
偏差小 (最低1mm水柱)
接線空間大
多種安裝配件的型號可供選擇
應用
這種壓差（差動）開關是用於感應空氣流動，空氣壓
力或空氣壓差，典型的應用包括：
探測過濾器阻塞狀態
探測空調盤管結霜狀況或除霜週期的開始時間
檢測暖風或通風管內的風流狀態
作為變風量空調系統的最大風流控制器 -
Globe Valve
Pegler 1031 Bronze Globe Valve 1-1/2” DN40 (112011)
Pegler 1031 Bronze Globe Valve 1-1/2” DN40 (112011)
The Pegler brand has been a major force in valves for over 100 years and is continuing development in today’s markets by offering globe valves as a traditional offer for isolation and regulation in pipe lines. With two seat options this concise range of globe valves are used to throttle efficiently.
Pegler Globe Valves are used for flow regulation, frequent operation, increased flow resistance or positive shutoff when closed.Specifications:
Dimensions: 1-1/2”
Series: 1031 GLOBE VALVE
Product Code: 112011
BS 5154 PN32 Series B
metal disk
Flow Rate: 26.90Kv m3/h
Minimum Operating Pressure (bar): No Minimum Operating Pressure
Maximum Cold Working Pressure (bar): 32.0 bar at temperatures up to 100°C
Maximum Hot Working Pressure (bar): 14.0 bar at temperatures up to 198°C -
Globe Valve
Pegler 1031 Bronze Globe Valve 1-1/4” DN32 (112010)
Pegler 1031 Bronze Globe Valve 1-1/4” DN32 (112010)
The Pegler brand has been a major force in valves for over 100 years and is continuing development in today’s markets by offering globe valves as a traditional offer for isolation and regulation in pipe lines. With two seat options this concise range of globe valves are used to throttle efficiently.
Pegler Globe Valves are used for flow regulation, frequent operation, increased flow resistance or positive shutoff when closed.Specifications:
Dimensions: 1-1/4”
Series: 1031 GLOBE VALVE
Product Code: 112010
BS 5154 PN32 Series B
metal disk
Flow Rate: 18.70Kv m3/h
Minimum Operating Pressure (bar): No Minimum Operating Pressure
Maximum Cold Working Pressure (bar): 32.0 bar at temperatures up to 100°C
Maximum Hot Working Pressure (bar): 14.0 bar at temperatures up to 198°C -
Globe Valve
Pegler 1031 Bronze Globe Valve 1” DN25 (112009)
Pegler 1031 Bronze Globe Valve 1” DN25 (112009)
The Pegler brand has been a major force in valves for over 100 years and is continuing development in today’s markets by offering globe valves as a traditional offer for isolation and regulation in pipe lines. With two seat options this concise range of globe valves are used to throttle efficiently.
Pegler Globe Valves are used for flow regulation, frequent operation, increased flow resistance or positive shutoff when closed.Specifications:
Dimensions: 1”
Series: 1031 GLOBE VALVE
Product Code: 112009
BS 5154 PN32 Series B
metal disk
Flow Rate: 11.70Kv m3/h
Minimum Operating Pressure (bar): No Minimum Operating Pressure
Maximum Cold Working Pressure (bar): 32.0 bar at temperatures up to 100°C
Maximum Hot Working Pressure (bar): 14.0 bar at temperatures up to 198°C -
Globe Valve
Pegler 1031 Bronze Globe Valve 1/2″ DN15 (112007)
Pegler 1031 Bronze Globe Valve 1/2″ DN15 (112007)
The Pegler brand has been a major force in valves for over 100 years and is continuing development in today’s markets by offering globe valves as a traditional offer for isolation and regulation in pipe lines. With two seat options this concise range of globe valves are used to throttle efficiently.
Pegler Globe Valves are used for flow regulation, frequent operation, increased flow resistance or positive shutoff when closed.Specifications:
Dimensions: 1/2″
Series: 1031 GLOBE VALVE
Product Code: 112007
BS 5154 PN32 Series B
metal disk
Flow Rate: 2.30Kv m3/h
Minimum Operating Pressure (bar): No Minimum Operating Pressure
Maximum Cold Working Pressure (bar): 32.0 bar at temperatures up to 100°C
Maximum Hot Working Pressure (bar): 14.0 bar at temperatures up to 198°C -
Globe Valve
Pegler 1031 Bronze Globe Valve 2” DN50 (112012)
Pegler 1031 Bronze Globe Valve 2” DN50 (112012)
The Pegler brand has been a major force in valves for over 100 years and is continuing development in today’s markets by offering globe valves as a traditional offer for isolation and regulation in pipe lines. With two seat options this concise range of globe valves are used to throttle efficiently.
Pegler Globe Valves are used for flow regulation, frequent operation, increased flow resistance or positive shutoff when closed.Specifications:
Dimensions: 2”
Series: 1031 GLOBE VALVE
Product Code: 112012
BS 5154 PN32 Series B
metal disk
Flow Rate: 49.10Kv m3/h
Minimum Operating Pressure (bar): No Minimum Operating Pressure
Maximum Cold Working Pressure (bar): 32.0 bar at temperatures up to 100°C
Maximum Hot Working Pressure (bar): 14.0 bar at temperatures up to 198°C -
Globe Valve
Pegler 1031 Bronze Globe Valve 3/4” DN20 (112008)
Pegler 1031 Bronze Globe Valve 3/4” DN20 (112008)
The Pegler brand has been a major force in valves for over 100 years and is continuing development in today’s markets by offering globe valves as a traditional offer for isolation and regulation in pipe lines. With two seat options this concise range of globe valves are used to throttle efficiently.
Pegler Globe Valves are used for flow regulation, frequent operation, increased flow resistance or positive shutoff when closed.Specifications:
Dimensions: 3/4”
Series: 1031 GLOBE VALVE
Product Code: 112008
BS 5154 PN32 Series B
metal disk
Flow Rate: 5.90Kv m3/h
Minimum Operating Pressure (bar): No Minimum Operating Pressure
Maximum Cold Working Pressure (bar): 32.0 bar at temperatures up to 100°C
Maximum Hot Working Pressure (bar): 14.0 bar at temperatures up to 198°C -
Gate Valve
Pegler 10751 Bronze Gate Valve 1-1/2” (101054)
Pegler 10751 Bronze Gate Valve 1-1/2” (101054)
The Pegler brand has been a major force in valves for over 100 years and is continuing development in todays’ markets by offering gate valves with heat free end connections. Press fit and Push fit connection options now complement its traditional threaded, compression and flanged valve options. Optimally designed, traditional full way gate valves in the Pegler Commercial range are designed for long trouble free service. Available in hand wheel and key operated lockshield designs they provide an ideal means of isolating a range of fluids in pipe lines
Specifications:
Dimensions: 1-1/2”
Series: 10751 PN20 Gate Valve
Product Code: 101054
Bronze Full Way Gate Valve
BS 5154 PN20 Series B
Flow Rate: 94.68Kv m3/h
Minimum Operating Pressure (bar): No Minimum Operating Pressure
Maximum Cold Working Pressure (bar): 20.0 bar at temperatures up to 100°C
Maximum Hot Working Pressure (bar): 9.0 bar at temperatures up to 180°C -
Gate Valve
Pegler 10751 Bronze Gate Valve 1-1/4” (101053)
Pegler 10751 Bronze Gate Valve 1-1/4” (101053)
The Pegler brand has been a major force in valves for over 100 years and is continuing development in todays’ markets by offering gate valves with heat free end connections. Press fit and Push fit connection options now complement its traditional threaded, compression and flanged valve options. Optimally designed, traditional full way gate valves in the Pegler Commercial range are designed for long trouble free service. Available in hand wheel and key operated lockshield designs they provide an ideal means of isolating a range of fluids in pipe lines
Specifications:
Dimensions: 1-1/4”
Series: 10751 PN20 Gate Valve
Product Code: 101053
Bronze Full Way Gate Valve
BS 5154 PN20 Series B
Flow Rate: 65.98Kv m3/h
Minimum Operating Pressure (bar): No Minimum Operating Pressure
Maximum Cold Working Pressure (bar): 20.0 bar at temperatures up to 100°C
Maximum Hot Working Pressure (bar): 9.0 bar at temperatures up to 180°C
