Showing 916–930 of 1809 results
testo 0609 1773 Efficient, rugged air probe, Pt100
Made in Germany
Specification:
Measuring range: -50 to +400 °C
Accuracy: Class A (-50 to +300 °C), Class B (Remaining Range) ¹⁾
Reaction time: 70 sec
1) According to standard 60751, the accuracies of Class A and B refer to -200 to +600 °C (Pt100)
General technical data:
Length probe shaft: 114mm
Fixed cable: yes
Cable length: 1.2m
Diameter probe shaft tip: 4mm
Diameter probe shaft: 5mm
Length probe shaft tip: 50mm
testo 0610-1725 Temperature probe with a long cable for measurements in liquids, pastes and in air – Accurate immersion/penetration probe
Made in Germany
Temperature probe with a long cable for measurements in liquids, pastes and in air.
– NTC probe with exceptionally long 6 m cable, can be installed for long-term measurements
– For connection to the testo Saveris 2-T2 Wi-Fi data logger
– Measuring range: -31 to 176 °F (-35 to +80 °C)
The temperature probe featuring a long cable and flat tip is suitable for measurements in liquids and pastes as well as for air temperature measurements. Thanks to its NTC sensor element, the probe provides precise temperature measurements with an accuracy of up to ±0.36 °F (±0.2 °C).
The temperature probe features a 6 m cable. This exceptionally long cable means that it can also be used at measuring points located a long distance away from the Wi-Fi data logger.
For long-term measurements, you can mount the temperature probe permanently at the measuring location. To do this you only need a clamp or PG gland (not included in delivery).
The temperature probe is waterproof in accordance with protection class IP 67. Consequently, measurements can be taken outdoors for example.
This probe’s response time t99 (time it takes for the probe to register 99% of the jump in temperature) of 5 seconds refers to measurements in moving water at 140 °F (+60 °C). This response time is extended when, for example, measurements are taken in still liquid, pastes or air.*
*For air temperature measurements, the response time is about 40 – 60 times higher than the indicated value measured in water. If you should require a rather sluggish temperature probe to measure air temperature, this probe is particularly suitable because it does not take brief temperature peaks into account at all, or only to a very small degree, when measuring temperature. For example, if you are planning to use this probe to measure air temperature in the refrigerator, briefly opening the refrigerator door would not take into account the temperature fluctuation which results from mixing the warm room temperature with the refrigerator temperature.
If you need an air temperature probe with a fast response time, your best choice would be the exceptionally fast temperature probe 0602 0493 which has a large measuring range. This temperature probe can be connected to the testo Saveris 2-T3 Wi-Fi data logger.
Delivery Scope
1 x NTC temperature probe 0610 1725, can be connected to the testo Saveris 2-T2 Wi-Fi data logger
testo 0613 1912 Waterproof surface probe for flat surfaces – NTC
Made in Germany
testo 0613 1912 Waterproof surface probe for flat surfaces – NTC is ideal for measuring the temperature on refrigeration systems, in cold storage rooms, in cold storage warehouses and also outdoors. Its integrated NTC sensor means that you can also count on accurate measurement results at low temperatures.
Specification:
Measuring range: -50 ~ +150 °C *
Accuracy:
±0.5% (100 ~ +150°C)
±0.2 °C (-25 ~ +74.9°C)
±0.4°C (Remaining Range)
Reaction time: 35 sec
* Long-term measurement range +125°C, short-term +150°C or +140°C (2 minutes)
Delivery Scope
Waterproof surface temperature probe (NTC) with fixed cable 1.2 m.
testo 176T2 Two-channel Temperature Data Logger
testo 176T2 temperature Data Logger is ideal for the monitoring of temperatures.
– RTD sensors connections for highly accurate data logging of temperatures
– Data transfer possible using the USB port, or SD card (optional)
– Easy to read large display that shows current reading
– IP65 protection class
– Capable of CFR 21 Part 11 Compliancy
– Free data logger software available for download
– Data is secured within the logger, and can be password protected using ComSoft
Monitoring and documentation of the temperature in cold rooms
Many foods and drugs have to be stored within a specific cold temperature range. This can be done in individual cooled store rooms, but also in specialised cold stores or cold warehouses with high-rack facilities. The temperature must be continuously documented in all these cold storage facilities, because strict rules apply to quality management in both the food and drugs industries.
Temperature monitoring in deep-freeze rooms for foods
There are a huge number of facilities where (deep-)frozen food has to be stored. These range from individual deep-freeze rooms on small food producers’ sites (e.g. butchers), at restaurants and supermarkets, via deep-freeze rooms in the food industry, through to specialised cold stores / deep-freeze warehouses with high-rack facilities. The temperature must be continuously documented in all these facilities.
Typically, data loggers are used to measure the air temperature in storage facilities of this kind. The measuring instrument is installed in the deep-freeze room – as far as possible at critical points such as doors or cooling plants – and records the temperature data at defined intervals (typically: 15 minutes).
The recorded data can then be analysed and archived using special software.
Delivery Scope
testo 176T2 temperature data logger with RTD sensor connectors for highly accurate data logging, batteries, and certificate of conformity
*Note: External PT100 Probe must be purchased separately.
testo 416 – Small vane anemometer
The testo 416 small vane anemometer (air flow meter) with an attached vane probe on a telescoping handle accurately and easily measures air velocity and volume flow (CFM) for in-duct and a variety of HVAC applications above 120 fpm. It also allows you to switch between volume flow and velocity readings quickly.
As vane technology is inherently air density independent, the testo 416 handheld digital vane anemometer provides repeatable and reliable readings test after test.
– Timed average eases and quickens the task of duct register traverses
– Hold button to freeze readings
– Optional TopSafe case provides superior protection from dirt, moisture, and impact
– Auto-off function saves battery life
– Handheld digital vane anemometer with telescoping handle to measure CFM in air ducts
Specification:
– Measuring range: 0.6 ~ 40 m/s
– Accuracy: ±(0.2 m/s + 1.5 %測量值)
– Resolution: 0.1 m/s
– Operating temperature: -20 ~ +50 °C
– Battery type: 9V電池
– Battery life: 80 小時
– Dimensions: 182 x 64 x 40 mm
– Weight: 325 g
Delivery Scope:
testo 416 vane anemometer with permanently connected 16 mm telescopic vane (max. length 890 mm), calibration certificate, and batteries
testo Saveris 2-H1 Wi-Fi Temperature & Humidity data logger
Germany testo Saveris 2-H1 Wi-Fi temperature & humidity data logger system is an easy, versatile, and secure solution for the measurement and monitoring of temperature and humidity. The system consists of at least one Wi-Fi data logger and a testo Cloud license (online data storage). As a component of this data logger system, the testo Saveris 2-H1 stores all measured values, and transmits them directly by Wi-Fi to the testo Cloud. The measurement rate is adjustable from 5 seconds to 24 hours. You can use the alarm function to receive immediate alarms by e-mail or SMS text message (optional), when user set limit values are exceeded.
Working Scenario:
1. Storage, refrigerated & frozen environment and working environment measurement
2. Temperature & Humidity monitoring of wine cabinet
3. Temperature & Humidity monitoring of medicine cabinet
4. Temperature & Humidity measurement of expensive animal cage
Technical Specification:
Temperature – NTC:
– Measuring range: -22° to 122 °F / -30 to +50 °C
– Accuracy: ±0.9 °F / ±0.5 °C
– Resolution: 0.1 °F / 0.1 °C
Humidity – Capacitive
– Measuring range: 0 ~ 100 %RH
– Accuracy: ±2 %RH
– Resolution: 0.1 %RH
– Internal temperature and humidity sensor
– Large, easy to read display
– Automatically transmits data over 2.4 GHz Wi-Fi networks
– Stores up to 10,000 values per channel (temperature and humidity)
Installation, readout, and analysis of Wi-Fi data loggers
The testo Saveris 2-H2 Wi-Fi data logger is easily installed. Select the appropriate testo Cloud license to fit your company’s needs, connect through your WLAN network, then log in to the testo Cloud to configure the logger and begin collecting measurements. Logger and system settings, alarm settings, and outputs are quickly set. Now relax, because Saveris 2 is on the job, and will alert you if a limit or problem is detected.
The logger itself displays the current measurement values, alarm conditions, and the remaining battery life. The standard batteries (AA) have a life expectancy of 24 months, and can be replaced as needed. The internal data storage of the Wi-Fi data logger has a capacity of 10,000 measurement values per channel/measurement type.
IMPORTANT NOTE:
To use testo Cloud, you must first register a testo cloud account at https://www.saveris.net
Delivery Scope
– testo Saveris 2-H1 Wi-Fi data logger
– Micro USB cable
– Wall bracket with lock
– Batteries (4 AA)
– Instruction manual
– Factory calibration document
testo Saveris 2-T2 – Wi-Fi data logger with 2 external NTC temperature probe connectors
Germany testo Saveris 2-T2 Wi-Fi data logger system is an easy, versatile, and secure solution for the measurement and monitoring of temperature and door contact values. The system consists of at least one Wi-Fi data logger and a testo Cloud license (online data storage). As a component of this data logger system, the testo Saveris 2-T2 stores all measured temperature values and door openings, and transmits them directly by Wi-Fi to the testo Cloud. The measurement rate is adjustable from 5 seconds to 24 hours. You can use the alarm function to receive immediate alarms by e-mail or SMS text message (optional), when user set limit values are exceeded.
Working Scenario:
1. Storage, refrigerated & frozen environment and working environment measurement
2. Temperature monitoring of wine cabinet
3. Temperature monitoring of medicine cabinet
4. Temperature measurement of expensive animal cage
Technical Specification:
– Measuring range: -58° to 302 °F / -50 to +150 °C
– Accuracy: ±0.5 °F / ±0.3 °C
– Resolution: 0.1 °F / 0.1 °C
– Plug-in temperature probes or door contacts
– Large, easy to read display
– Automatically transmits data over 2.4 GHz Wi-Fi networks
– Stores up to 10,000 values per channel
Installation, readout, and analysis of Wi-Fi data loggers
The testo Saveris 2-T2 Wi-Fi data logger is easily installed. Select the appropriate testo Cloud license to fit your company’s needs, connect through your WLAN network, then log in to the testo Cloud to configure the logger and begin collecting measurements. Logger and system settings, alarm settings, and outputs are quickly set. Now relax, because Saveris 2 is on the job, and will alert you if a limit or problem is detected.
The logger itself displays current measurement values, alarm conditions, and remaining battery life. The standard batteries (AA) have a life expectancy of 24 months, and can be replaced as needed. The internal data storage of the Wi-Fi data logger has a capacity of 10,000 measurement values per channel/measurement type. The rugged IP65 housing is suitable for any type of environment.
IMPORTANT NOTE:
1. testo Saveris 2-T2 Wi-Fi data logger requires a connectable probe or door contact.
2. To use testo Cloud, you must first register a testo cloud account at https://www.saveris.net
Delivery Scope
– testo Saveris 2-T2 Wi-Fi data logger
– Micro USB cable
– Wall bracket with lock
– Batteries (4 AA)
– Instruction manual
– Factory calibration document
For price inquiries, please Whatsapp or call +852.95617001
帶內置測量毛細管的箱式恆溫器，旋鈕調節溫度，範圍 0÷40°C
恆溫器的應用：控製冷卻設備的溫度，控制風扇，空調等。
外殼：灰色，由耐溫高達 65°C 的材料製成，RAL 7035。
壁掛式恆溫器
調節範圍：0÷40°C
精度：3°C
滯後：<3.5°C
測量泡：鍍鎳黃銅 L=70mm Ø7mm
最高外殼溫度：65°C
防護等級：IP44
觸點負載：16(4)A 250VAC；6(1)A 400VAC
觸點排列：SPDT，可切換（加熱或冷卻）
電連接器：扁平插頭 6.3 x 0.8 mm
尺寸（寬 x 高 x 深）：57 x 85 x 40 毫米
防護等級：IP44
測量球最高溫度：110°C
證書：CE
VA-7150系列同步電機驅動執行器，適合安裝在HVAC應用中的行程為19mm的閥門上，輸入信號可爲浮點控制和比例控制信號。
該系列執行器為緊凑型、非彈簧複位設計，輸入控制信號可選，可對閥門提供500N的作用力。
供電電源（50/60Hz）：230V ± 15%
電源電壓230, 50/60 (V AC, Hz)
控制類型漂浮的
控制信號230, 50/60 (V AC, Hz)
執行器類型線性
力量500牛
中風20 毫米
全行程時間190 秒
防護等級IP54 N
能量消耗2.4 伏安
淨重：0.8公斤
testo 0609 1773 Efficient, rugged air probe, Pt100
Made in Germany
Specification:
Measuring range: -50 to +400 °C
Accuracy: Class A (-50 to +300 °C), Class B (Remaining Range) ¹⁾
Reaction time: 70 sec
1) According to standard 60751, the accuracies of Class A and B refer to -200 to +600 °C (Pt100)
General technical data:
Length probe shaft: 114mm
Fixed cable: yes
Cable length: 1.2m
Diameter probe shaft tip: 4mm
Diameter probe shaft: 5mm
Length probe shaft tip: 50mm
testo 0610-1725 Temperature probe with a long cable for measurements in liquids, pastes and in air – Accurate immersion/penetration probe
Made in Germany
Temperature probe with a long cable for measurements in liquids, pastes and in air.
– NTC probe with exceptionally long 6 m cable, can be installed for long-term measurements
– For connection to the testo Saveris 2-T2 Wi-Fi data logger
– Measuring range: -31 to 176 °F (-35 to +80 °C)
The temperature probe featuring a long cable and flat tip is suitable for measurements in liquids and pastes as well as for air temperature measurements. Thanks to its NTC sensor element, the probe provides precise temperature measurements with an accuracy of up to ±0.36 °F (±0.2 °C).
The temperature probe features a 6 m cable. This exceptionally long cable means that it can also be used at measuring points located a long distance away from the Wi-Fi data logger.
For long-term measurements, you can mount the temperature probe permanently at the measuring location. To do this you only need a clamp or PG gland (not included in delivery).
The temperature probe is waterproof in accordance with protection class IP 67. Consequently, measurements can be taken outdoors for example.
This probe’s response time t99 (time it takes for the probe to register 99% of the jump in temperature) of 5 seconds refers to measurements in moving water at 140 °F (+60 °C). This response time is extended when, for example, measurements are taken in still liquid, pastes or air.*
*For air temperature measurements, the response time is about 40 – 60 times higher than the indicated value measured in water. If you should require a rather sluggish temperature probe to measure air temperature, this probe is particularly suitable because it does not take brief temperature peaks into account at all, or only to a very small degree, when measuring temperature. For example, if you are planning to use this probe to measure air temperature in the refrigerator, briefly opening the refrigerator door would not take into account the temperature fluctuation which results from mixing the warm room temperature with the refrigerator temperature.
If you need an air temperature probe with a fast response time, your best choice would be the exceptionally fast temperature probe 0602 0493 which has a large measuring range. This temperature probe can be connected to the testo Saveris 2-T3 Wi-Fi data logger.
Delivery Scope
1 x NTC temperature probe 0610 1725, can be connected to the testo Saveris 2-T2 Wi-Fi data logger
testo 0613 1912 Waterproof surface probe for flat surfaces – NTC
Made in Germany
testo 0613 1912 Waterproof surface probe for flat surfaces – NTC is ideal for measuring the temperature on refrigeration systems, in cold storage rooms, in cold storage warehouses and also outdoors. Its integrated NTC sensor means that you can also count on accurate measurement results at low temperatures.
Specification:
Measuring range: -50 ~ +150 °C *
Accuracy:
±0.5% (100 ~ +150°C)
±0.2 °C (-25 ~ +74.9°C)
±0.4°C (Remaining Range)
Reaction time: 35 sec
* Long-term measurement range +125°C, short-term +150°C or +140°C (2 minutes)
Delivery Scope
Waterproof surface temperature probe (NTC) with fixed cable 1.2 m.
testo 176T2 Two-channel Temperature Data Logger
testo 176T2 temperature Data Logger is ideal for the monitoring of temperatures.
– RTD sensors connections for highly accurate data logging of temperatures
– Data transfer possible using the USB port, or SD card (optional)
– Easy to read large display that shows current reading
– IP65 protection class
– Capable of CFR 21 Part 11 Compliancy
– Free data logger software available for download
– Data is secured within the logger, and can be password protected using ComSoft
Monitoring and documentation of the temperature in cold rooms
Many foods and drugs have to be stored within a specific cold temperature range. This can be done in individual cooled store rooms, but also in specialised cold stores or cold warehouses with high-rack facilities. The temperature must be continuously documented in all these cold storage facilities, because strict rules apply to quality management in both the food and drugs industries.
Temperature monitoring in deep-freeze rooms for foods
There are a huge number of facilities where (deep-)frozen food has to be stored. These range from individual deep-freeze rooms on small food producers’ sites (e.g. butchers), at restaurants and supermarkets, via deep-freeze rooms in the food industry, through to specialised cold stores / deep-freeze warehouses with high-rack facilities. The temperature must be continuously documented in all these facilities.
Typically, data loggers are used to measure the air temperature in storage facilities of this kind. The measuring instrument is installed in the deep-freeze room – as far as possible at critical points such as doors or cooling plants – and records the temperature data at defined intervals (typically: 15 minutes).
The recorded data can then be analysed and archived using special software.
Delivery Scope
testo 176T2 temperature data logger with RTD sensor connectors for highly accurate data logging, batteries, and certificate of conformity
*Note: External PT100 Probe must be purchased separately.
testo 416 – Small vane anemometer
The testo 416 small vane anemometer (air flow meter) with an attached vane probe on a telescoping handle accurately and easily measures air velocity and volume flow (CFM) for in-duct and a variety of HVAC applications above 120 fpm. It also allows you to switch between volume flow and velocity readings quickly.
As vane technology is inherently air density independent, the testo 416 handheld digital vane anemometer provides repeatable and reliable readings test after test.
– Timed average eases and quickens the task of duct register traverses
– Hold button to freeze readings
– Optional TopSafe case provides superior protection from dirt, moisture, and impact
– Auto-off function saves battery life
– Handheld digital vane anemometer with telescoping handle to measure CFM in air ducts
Specification:
– Measuring range: 0.6 ~ 40 m/s
– Accuracy: ±(0.2 m/s + 1.5 %測量值)
– Resolution: 0.1 m/s
– Operating temperature: -20 ~ +50 °C
– Battery type: 9V電池
– Battery life: 80 小時
– Dimensions: 182 x 64 x 40 mm
– Weight: 325 g
Delivery Scope:
testo 416 vane anemometer with permanently connected 16 mm telescopic vane (max. length 890 mm), calibration certificate, and batteries
testo Saveris 2-H1 Wi-Fi Temperature & Humidity data logger
Germany testo Saveris 2-H1 Wi-Fi temperature & humidity data logger system is an easy, versatile, and secure solution for the measurement and monitoring of temperature and humidity. The system consists of at least one Wi-Fi data logger and a testo Cloud license (online data storage). As a component of this data logger system, the testo Saveris 2-H1 stores all measured values, and transmits them directly by Wi-Fi to the testo Cloud. The measurement rate is adjustable from 5 seconds to 24 hours. You can use the alarm function to receive immediate alarms by e-mail or SMS text message (optional), when user set limit values are exceeded.
Working Scenario:
1. Storage, refrigerated & frozen environment and working environment measurement
2. Temperature & Humidity monitoring of wine cabinet
3. Temperature & Humidity monitoring of medicine cabinet
4. Temperature & Humidity measurement of expensive animal cage
Technical Specification:
Temperature – NTC:
– Measuring range: -22° to 122 °F / -30 to +50 °C
– Accuracy: ±0.9 °F / ±0.5 °C
– Resolution: 0.1 °F / 0.1 °C
Humidity – Capacitive
– Measuring range: 0 ~ 100 %RH
– Accuracy: ±2 %RH
– Resolution: 0.1 %RH
– Internal temperature and humidity sensor
– Large, easy to read display
– Automatically transmits data over 2.4 GHz Wi-Fi networks
– Stores up to 10,000 values per channel (temperature and humidity)
Installation, readout, and analysis of Wi-Fi data loggers
The testo Saveris 2-H2 Wi-Fi data logger is easily installed. Select the appropriate testo Cloud license to fit your company’s needs, connect through your WLAN network, then log in to the testo Cloud to configure the logger and begin collecting measurements. Logger and system settings, alarm settings, and outputs are quickly set. Now relax, because Saveris 2 is on the job, and will alert you if a limit or problem is detected.
The logger itself displays the current measurement values, alarm conditions, and the remaining battery life. The standard batteries (AA) have a life expectancy of 24 months, and can be replaced as needed. The internal data storage of the Wi-Fi data logger has a capacity of 10,000 measurement values per channel/measurement type.
IMPORTANT NOTE:
To use testo Cloud, you must first register a testo cloud account at https://www.saveris.net
Delivery Scope
– testo Saveris 2-H1 Wi-Fi data logger
– Micro USB cable
– Wall bracket with lock
– Batteries (4 AA)
– Instruction manual
– Factory calibration document
testo Saveris 2-T2 – Wi-Fi data logger with 2 external NTC temperature probe connectors
Germany testo Saveris 2-T2 Wi-Fi data logger system is an easy, versatile, and secure solution for the measurement and monitoring of temperature and door contact values. The system consists of at least one Wi-Fi data logger and a testo Cloud license (online data storage). As a component of this data logger system, the testo Saveris 2-T2 stores all measured temperature values and door openings, and transmits them directly by Wi-Fi to the testo Cloud. The measurement rate is adjustable from 5 seconds to 24 hours. You can use the alarm function to receive immediate alarms by e-mail or SMS text message (optional), when user set limit values are exceeded.
Working Scenario:
1. Storage, refrigerated & frozen environment and working environment measurement
2. Temperature monitoring of wine cabinet
3. Temperature monitoring of medicine cabinet
4. Temperature measurement of expensive animal cage
Technical Specification:
– Measuring range: -58° to 302 °F / -50 to +150 °C
– Accuracy: ±0.5 °F / ±0.3 °C
– Resolution: 0.1 °F / 0.1 °C
– Plug-in temperature probes or door contacts
– Large, easy to read display
– Automatically transmits data over 2.4 GHz Wi-Fi networks
– Stores up to 10,000 values per channel
Installation, readout, and analysis of Wi-Fi data loggers
The testo Saveris 2-T2 Wi-Fi data logger is easily installed. Select the appropriate testo Cloud license to fit your company’s needs, connect through your WLAN network, then log in to the testo Cloud to configure the logger and begin collecting measurements. Logger and system settings, alarm settings, and outputs are quickly set. Now relax, because Saveris 2 is on the job, and will alert you if a limit or problem is detected.
The logger itself displays current measurement values, alarm conditions, and remaining battery life. The standard batteries (AA) have a life expectancy of 24 months, and can be replaced as needed. The internal data storage of the Wi-Fi data logger has a capacity of 10,000 measurement values per channel/measurement type. The rugged IP65 housing is suitable for any type of environment.
IMPORTANT NOTE:
1. testo Saveris 2-T2 Wi-Fi data logger requires a connectable probe or door contact.
2. To use testo Cloud, you must first register a testo cloud account at https://www.saveris.net
Delivery Scope
– testo Saveris 2-T2 Wi-Fi data logger
– Micro USB cable
– Wall bracket with lock
– Batteries (4 AA)
– Instruction manual
– Factory calibration document
For price inquiries, please Whatsapp or call +852.95617001
帶內置測量毛細管的箱式恆溫器，旋鈕調節溫度，範圍 0÷40°C
恆溫器的應用：控製冷卻設備的溫度，控制風扇，空調等。
外殼：灰色，由耐溫高達 65°C 的材料製成，RAL 7035。
壁掛式恆溫器
調節範圍：0÷40°C
精度：3°C
滯後：<3.5°C
測量泡：鍍鎳黃銅 L=70mm Ø7mm
最高外殼溫度：65°C
防護等級：IP44
觸點負載：16(4)A 250VAC；6(1)A 400VAC
觸點排列：SPDT，可切換（加熱或冷卻）
電連接器：扁平插頭 6.3 x 0.8 mm
尺寸（寬 x 高 x 深）：57 x 85 x 40 毫米
防護等級：IP44
測量球最高溫度：110°C
證書：CE
testo 0609 1773 Efficient, rugged air probe, Pt100
Made in Germany
Specification:
Measuring range: -50 to +400 °C
Accuracy: Class A (-50 to +300 °C), Class B (Remaining Range) ¹⁾
Reaction time: 70 sec
1) According to standard 60751, the accuracies of Class A and B refer to -200 to +600 °C (Pt100)
General technical data:
Length probe shaft: 114mm
Fixed cable: yes
Cable length: 1.2m
Diameter probe shaft tip: 4mm
Diameter probe shaft: 5mm
Length probe shaft tip: 50mm
testo 0610-1725 Temperature probe with a long cable for measurements in liquids, pastes and in air – Accurate immersion/penetration probe
Made in Germany
Temperature probe with a long cable for measurements in liquids, pastes and in air.
– NTC probe with exceptionally long 6 m cable, can be installed for long-term measurements
– For connection to the testo Saveris 2-T2 Wi-Fi data logger
– Measuring range: -31 to 176 °F (-35 to +80 °C)
The temperature probe featuring a long cable and flat tip is suitable for measurements in liquids and pastes as well as for air temperature measurements. Thanks to its NTC sensor element, the probe provides precise temperature measurements with an accuracy of up to ±0.36 °F (±0.2 °C).
The temperature probe features a 6 m cable. This exceptionally long cable means that it can also be used at measuring points located a long distance away from the Wi-Fi data logger.
For long-term measurements, you can mount the temperature probe permanently at the measuring location. To do this you only need a clamp or PG gland (not included in delivery).
The temperature probe is waterproof in accordance with protection class IP 67. Consequently, measurements can be taken outdoors for example.
This probe’s response time t99 (time it takes for the probe to register 99% of the jump in temperature) of 5 seconds refers to measurements in moving water at 140 °F (+60 °C). This response time is extended when, for example, measurements are taken in still liquid, pastes or air.*
*For air temperature measurements, the response time is about 40 – 60 times higher than the indicated value measured in water. If you should require a rather sluggish temperature probe to measure air temperature, this probe is particularly suitable because it does not take brief temperature peaks into account at all, or only to a very small degree, when measuring temperature. For example, if you are planning to use this probe to measure air temperature in the refrigerator, briefly opening the refrigerator door would not take into account the temperature fluctuation which results from mixing the warm room temperature with the refrigerator temperature.
If you need an air temperature probe with a fast response time, your best choice would be the exceptionally fast temperature probe 0602 0493 which has a large measuring range. This temperature probe can be connected to the testo Saveris 2-T3 Wi-Fi data logger.
Delivery Scope
1 x NTC temperature probe 0610 1725, can be connected to the testo Saveris 2-T2 Wi-Fi data logger
testo 0613 1912 Waterproof surface probe for flat surfaces – NTC
Made in Germany
testo 0613 1912 Waterproof surface probe for flat surfaces – NTC is ideal for measuring the temperature on refrigeration systems, in cold storage rooms, in cold storage warehouses and also outdoors. Its integrated NTC sensor means that you can also count on accurate measurement results at low temperatures.
Specification:
Measuring range: -50 ~ +150 °C *
Accuracy:
±0.5% (100 ~ +150°C)
±0.2 °C (-25 ~ +74.9°C)
±0.4°C (Remaining Range)
Reaction time: 35 sec
* Long-term measurement range +125°C, short-term +150°C or +140°C (2 minutes)
Delivery Scope
Waterproof surface temperature probe (NTC) with fixed cable 1.2 m.
testo 176T2 Two-channel Temperature Data Logger
testo 176T2 temperature Data Logger is ideal for the monitoring of temperatures.
– RTD sensors connections for highly accurate data logging of temperatures
– Data transfer possible using the USB port, or SD card (optional)
– Easy to read large display that shows current reading
– IP65 protection class
– Capable of CFR 21 Part 11 Compliancy
– Free data logger software available for download
– Data is secured within the logger, and can be password protected using ComSoft
Monitoring and documentation of the temperature in cold rooms
Many foods and drugs have to be stored within a specific cold temperature range. This can be done in individual cooled store rooms, but also in specialised cold stores or cold warehouses with high-rack facilities. The temperature must be continuously documented in all these cold storage facilities, because strict rules apply to quality management in both the food and drugs industries.
Temperature monitoring in deep-freeze rooms for foods
There are a huge number of facilities where (deep-)frozen food has to be stored. These range from individual deep-freeze rooms on small food producers’ sites (e.g. butchers), at restaurants and supermarkets, via deep-freeze rooms in the food industry, through to specialised cold stores / deep-freeze warehouses with high-rack facilities. The temperature must be continuously documented in all these facilities.
Typically, data loggers are used to measure the air temperature in storage facilities of this kind. The measuring instrument is installed in the deep-freeze room – as far as possible at critical points such as doors or cooling plants – and records the temperature data at defined intervals (typically: 15 minutes).
The recorded data can then be analysed and archived using special software.
Delivery Scope
testo 176T2 temperature data logger with RTD sensor connectors for highly accurate data logging, batteries, and certificate of conformity
*Note: External PT100 Probe must be purchased separately.
testo 416 – Small vane anemometer
The testo 416 small vane anemometer (air flow meter) with an attached vane probe on a telescoping handle accurately and easily measures air velocity and volume flow (CFM) for in-duct and a variety of HVAC applications above 120 fpm. It also allows you to switch between volume flow and velocity readings quickly.
As vane technology is inherently air density independent, the testo 416 handheld digital vane anemometer provides repeatable and reliable readings test after test.
– Timed average eases and quickens the task of duct register traverses
– Hold button to freeze readings
– Optional TopSafe case provides superior protection from dirt, moisture, and impact
– Auto-off function saves battery life
– Handheld digital vane anemometer with telescoping handle to measure CFM in air ducts
Specification:
– Measuring range: 0.6 ~ 40 m/s
– Accuracy: ±(0.2 m/s + 1.5 %測量值)
– Resolution: 0.1 m/s
– Operating temperature: -20 ~ +50 °C
– Battery type: 9V電池
– Battery life: 80 小時
– Dimensions: 182 x 64 x 40 mm
– Weight: 325 g
Delivery Scope:
testo 416 vane anemometer with permanently connected 16 mm telescopic vane (max. length 890 mm), calibration certificate, and batteries
testo Saveris 2-H1 Wi-Fi Temperature & Humidity data logger
Germany testo Saveris 2-H1 Wi-Fi temperature & humidity data logger system is an easy, versatile, and secure solution for the measurement and monitoring of temperature and humidity. The system consists of at least one Wi-Fi data logger and a testo Cloud license (online data storage). As a component of this data logger system, the testo Saveris 2-H1 stores all measured values, and transmits them directly by Wi-Fi to the testo Cloud. The measurement rate is adjustable from 5 seconds to 24 hours. You can use the alarm function to receive immediate alarms by e-mail or SMS text message (optional), when user set limit values are exceeded.
Working Scenario:
1. Storage, refrigerated & frozen environment and working environment measurement
2. Temperature & Humidity monitoring of wine cabinet
3. Temperature & Humidity monitoring of medicine cabinet
4. Temperature & Humidity measurement of expensive animal cage
Technical Specification:
Temperature – NTC:
– Measuring range: -22° to 122 °F / -30 to +50 °C
– Accuracy: ±0.9 °F / ±0.5 °C
– Resolution: 0.1 °F / 0.1 °C
Humidity – Capacitive
– Measuring range: 0 ~ 100 %RH
– Accuracy: ±2 %RH
– Resolution: 0.1 %RH
– Internal temperature and humidity sensor
– Large, easy to read display
– Automatically transmits data over 2.4 GHz Wi-Fi networks
– Stores up to 10,000 values per channel (temperature and humidity)
Installation, readout, and analysis of Wi-Fi data loggers
The testo Saveris 2-H2 Wi-Fi data logger is easily installed. Select the appropriate testo Cloud license to fit your company’s needs, connect through your WLAN network, then log in to the testo Cloud to configure the logger and begin collecting measurements. Logger and system settings, alarm settings, and outputs are quickly set. Now relax, because Saveris 2 is on the job, and will alert you if a limit or problem is detected.
The logger itself displays the current measurement values, alarm conditions, and the remaining battery life. The standard batteries (AA) have a life expectancy of 24 months, and can be replaced as needed. The internal data storage of the Wi-Fi data logger has a capacity of 10,000 measurement values per channel/measurement type.
IMPORTANT NOTE:
To use testo Cloud, you must first register a testo cloud account at https://www.saveris.net
Delivery Scope
– testo Saveris 2-H1 Wi-Fi data logger
– Micro USB cable
– Wall bracket with lock
– Batteries (4 AA)
– Instruction manual
– Factory calibration document
testo Saveris 2-T2 – Wi-Fi data logger with 2 external NTC temperature probe connectors
Germany testo Saveris 2-T2 Wi-Fi data logger system is an easy, versatile, and secure solution for the measurement and monitoring of temperature and door contact values. The system consists of at least one Wi-Fi data logger and a testo Cloud license (online data storage). As a component of this data logger system, the testo Saveris 2-T2 stores all measured temperature values and door openings, and transmits them directly by Wi-Fi to the testo Cloud. The measurement rate is adjustable from 5 seconds to 24 hours. You can use the alarm function to receive immediate alarms by e-mail or SMS text message (optional), when user set limit values are exceeded.
Working Scenario:
1. Storage, refrigerated & frozen environment and working environment measurement
2. Temperature monitoring of wine cabinet
3. Temperature monitoring of medicine cabinet
4. Temperature measurement of expensive animal cage
Technical Specification:
– Measuring range: -58° to 302 °F / -50 to +150 °C
– Accuracy: ±0.5 °F / ±0.3 °C
– Resolution: 0.1 °F / 0.1 °C
– Plug-in temperature probes or door contacts
– Large, easy to read display
– Automatically transmits data over 2.4 GHz Wi-Fi networks
– Stores up to 10,000 values per channel
Installation, readout, and analysis of Wi-Fi data loggers
The testo Saveris 2-T2 Wi-Fi data logger is easily installed. Select the appropriate testo Cloud license to fit your company’s needs, connect through your WLAN network, then log in to the testo Cloud to configure the logger and begin collecting measurements. Logger and system settings, alarm settings, and outputs are quickly set. Now relax, because Saveris 2 is on the job, and will alert you if a limit or problem is detected.
The logger itself displays current measurement values, alarm conditions, and remaining battery life. The standard batteries (AA) have a life expectancy of 24 months, and can be replaced as needed. The internal data storage of the Wi-Fi data logger has a capacity of 10,000 measurement values per channel/measurement type. The rugged IP65 housing is suitable for any type of environment.
IMPORTANT NOTE:
1. testo Saveris 2-T2 Wi-Fi data logger requires a connectable probe or door contact.
2. To use testo Cloud, you must first register a testo cloud account at https://www.saveris.net
Delivery Scope
– testo Saveris 2-T2 Wi-Fi data logger
– Micro USB cable
– Wall bracket with lock
– Batteries (4 AA)
– Instruction manual
– Factory calibration document
For price inquiries, please Whatsapp or call +852.95617001
帶內置測量毛細管的箱式恆溫器，旋鈕調節溫度，範圍 0÷40°C
恆溫器的應用：控製冷卻設備的溫度，控制風扇，空調等。
外殼：灰色，由耐溫高達 65°C 的材料製成，RAL 7035。
壁掛式恆溫器
調節範圍：0÷40°C
精度：3°C
滯後：<3.5°C
測量泡：鍍鎳黃銅 L=70mm Ø7mm
最高外殼溫度：65°C
防護等級：IP44
觸點負載：16(4)A 250VAC；6(1)A 400VAC
觸點排列：SPDT，可切換（加熱或冷卻）
電連接器：扁平插頭 6.3 x 0.8 mm
尺寸（寬 x 高 x 深）：57 x 85 x 40 毫米
防護等級：IP44
測量球最高溫度：110°C
證書：CE
DMB082 乾燥過濾器 
Emerson BVE258 球閥 
DCL084 乾燥過濾器 
